Bedienungsanleitung Aiwa XRM33 (Seite 6 von 64) (Englisch, Französisch, Spanisch)

29787

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two size AA (R6) batteries.

AA ‘(R6)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the

main unit. Buttons on the remote control with the same names

as those on the main unit can be used as well.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPE,

TUNER, AUWVIDEO, CD) on the main unit.

Each time FUNCTION is pressed while power is on, the next

function is selected cyclically.

* PLAY on the remote control

The function is the same as that of <P on the main unit.

FUNCTION

b PLAY

● If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible

electrolyte leakage.

● The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor above DEMO/ECO is exposed to intense light, such

as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)

POWER

(!) STANDBY/

Remote

sensor

DEMO/ECO

PHONES

‘L

Function

— buttons

To turn the unit on

Press one of the function buttons (TAPE, TUNER, AU)UVIDEO,

CD). Playback of the inserted disc or tape begins, or the

previously tuned station is received (Direct Play Function).

POWER/O STANDBY/ON is also available.

To turn the power off

Press POWER/O STANDBY/ON

The unit will return to the ECO mode or clock display depending

on the. setting before you turn on the unit.

If the previous setting is DEMO, the unit will also return to the

clock display.

● If the clock is not set, the unit will always return to the DEMO

mode.

DEMO (Demonstration) mode

When the AC cord is connected, the display window

demonstrates the functions of the unit. When the power is turned

on, the DEMO display is overridden by the operation display.

To cancel DEMO mode

Press DEMO/ECO.

To re-activate the DEMO mode, press DEMO/ECO until

the display window demonstrates the functions of the unit.

ECO (Power economizing) mode

Setting this unit to power economizing mode reduces power

consumption.

Press DEMO/ECO repeatedly (during power off) until “ECO

MODE is displayed.

The display disappears and the indicator on the POWER/O

STANDBY/ON button lights up.

DIMMER mode

Press DEMO/ECO twice during power on.

The display is dimmer than usual, press DEMO/ECO again to

restore normal display.

Using the headphones

Connect the headphones to PHONES jack with a stereo mini

plug (03.5 mm,

‘/8 inch).

No sound is output from the speakers while the headphones are

plugged in.

5 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa XRM33 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info