ISO A CONNECTOR
i
Depending on the manufacturer, the contacts on your vehicle
connection may be assigned differently. This is not a defect of the
device but caused by a deviating connector pin assignment by the
manufacturer of your vehicle. To provide a connection that
conforms to this device, please purchase an appropriate adapter
cable from a specialized dealer if required. Please consult a
specialist in your area if you have any questions about the
connections.
A4 YELLOW (B+): Connection for +12V operational voltage (diameter at
least 2.5 mm) to permanent plus of the vehicle.
A5 BLUE: To system control terminal of an external amplier or Automatic
Antenna (max. 100mA / 12V
DC
).
A7 RED ACC (+): Connection for +12V trigger voltage. Connect to ignition
key of the vehicle. If contacts A4 and A7 are switched, the device will
"forget" the stored stations after the ignition is turned off.
A8 GND (- /Ground): Attach the connection for the ground (diameter at least
2.5 mm) to the ground of the vehicle.
