Bedienungsanleitung Akai AL2608TBK (Seite 16 von 33) (Englisch)

516630

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English - 49 -

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores both

analogue and aerial DVB stations.

Digital Cable & Analogue: Searches and stores both

analogue and cable DVB stations.

• Whenever you select an automatic search type and

press OK button, a conrmation screen will appear

on the screen. To start installation process, select

Yes, to cancel select No by using .“ ” or “ ” and

OK button.

• After the auto channel scan type is set and selected

and conrmed, the installation process will start and

the progress bar will move along. Press “MENU”

button to cancel process. Located channels are not

stored if the process is cancelled.

Manual Tuning

HINT: This feature can be used for direct broadcast

entry.

• Select Manual Channel Scan from the Installation

menu by using “ ”/“ ” and OK buttons. Manual

Scan options screen will be displayed.

• Select the desired Search Type using “ ” or

“ ” button. Manual search options will change

accordingly. Use “ ”/“ ” button to highlight an item

and then press “ ” or “ ” button to set an option.

You can press “MENU” button to cancel.

Digital Aerial Manual Search

In manual channel scan, the number of the multiplex

or frequency are entered manually and only that

multiplex or frequency are searched for the channels.

After selecting search type as Digital, you can enter

the multiplex or frequency number using the numeric

buttons and press OK button to search.

Digital Cable Manual Search

In cable manual scan, you can enter frequency,

modulation, symbol rate and network channel scan

options. After selecting search type as Digital Cable,

you can set the desired options and press OK button

to search.

Analogue Manual Search

After selecting search type as analogue, you can use

“ ”/“ ” button to highlight an item and then press “

” or “ ” button to set an option.

Enter the channel number or frequency using the

numeric buttons. You can then press OK button

to search. When the channel is located, any new

channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation

menu by using “ ” or “ ” and OK buttons. The

analogue ne tune screen will be displayed. The

Analogue Fine Tune feature will not be available if

there are no analogue channels, digital channels

and external sources stored.

• Press OK button to proceed. Use “ ” or “ ” button

to set Fine Tune. When nished, press OK button

again.

Network Channel Scan

Select Network Channel Scan from the installation

menu by using “ ” or “ ” and OK buttons. Network

Channel Scan selection screen will be displayed.

Select Digital Aerial or Digital Cable and press

OK button to continue. The following message will

be asked. Select Yes to continue or select No to

cancel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai AL2608TBK Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai AL2608TBK

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info