Bedienungsanleitung Akai AL4222SMART (Seite 20 von 29) (Englisch)

612878

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English - 46 -

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any rewalls of your network allow the

TV wireless connection.

• Try searching for wireless networks again, using the

Network Settings menu screen.

If the wireless network does not function properly, try

using the wired network in your home. Refer to the

“Wired Connectivity” section for more information on

the process.

If the TV does not function using the wired connection,

check the modem (router). If the router does not

have a problem, check the internet connection of

your modem.

Connection is Slow

See the instruction book of your wireless modem to

get information on the internal service area, connection

speed, signal quality and other settings. You need to

have a high speed connection for your modem.

Distruption during playback or slow reactions

You could try the following in such a case:

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other Wi-Fi compatible devices. Try changing the active

channel on the WLAN router.

Using DLNA Network Service

DLNA (Digital Living Network Alliance) is a standard

that eases the viewing process of digital electronics and

makes them more convenient to use on a home network.

For further information, visit www.dlna.org.

The DLNA standard allows you to view and play photos,

music and videos stored in the DLNA media server

connected to your home network.

1. Nero Media Home Installation

The DLNA function cannot be used if the server

programme is not installed onto your PC. Please

prepare your PC with the provided Nero Media

Home programme. For more information about the

installation, please refer to the “Nero Media Home

Installation” section.

2. Connect to a Wired or Wireless Network

See the chapter Network Settings for detailed

conguration information.

3. Play Shared Files via Media Browser

Select Media Browser by using the Left or Right

buttons from the main menu and press OK. The Media

browser will then be displayed.

DLNA

DLNA support is only available in the Media Browser

folder mode. To enable folder mode, go to the Settings

tab in the main media browser screen and press OK. In

the settings options, highlight View Style and change to

Folder using the Left or Right buttons. Select the desired

media type and press OK.

If sharing congurations are set properly, Device

Selection screen will be displayed after selecting the

desired media type. Select the desired one and press

OK to display the content of the selected network or

USB memory. If you want to refresh the device list,

press the Green button. You can press Menu to exit.

If available networks are found, they will be listed on

this screen. Select media server or network that you

want to connect to using the Up or Down buttons and

press OK.

If you select the media type as Videos and choose a

device from the selection menu, a new menu screen

will appear on the screen.

Select Videos from this screen again to list all the

available video les from the selected network.

To play other media types from this screen, you must

go back to main Media Browser screen and select the

media type as desired and then perform the network

selection again. Refer to the Media Browser Menu

section for further information on le playback.

Subtitle les do not work if you watch videos from your

network through DLNA.

You can connect only one television with DLNA to

the same network. If a problem occurs with the DLNA

network, please switch your television off at the wall

socket and back on again. Trick mode and jump are

not supported with the DLNA function.

Note: There may be some PC’s which may not be able

to utilize the DLNA function due to administrator and

security settings (such as business PC’s).

For best home network streaming with this TV, the

supplied Nero software should be installed.

Nero MediaHome Installation

To install Nero MediaHome, please proceed as

follows:

Note: To use DLNA function, this software should be installed

to your PC.

1. Enter the link below completely in the adress-

bar of your web browser.

http://www.nero.com/mediahome-tv

2. Click the Download button on the opening

page. The installation le will be downloaded

onto your PC.

3. After the download is completed, double click

on the installation le to start the installation.

The installation wizard will guide you through

the installation process.

4. The prerequisites screen will be displayed rst.

The installation wizard checks the availability

of required third-party software on your PC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai AL4222SMART Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai AL4222SMART

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info