Bedienungsanleitung Akai ALED2605TBK (Seite 10 von 40) (Englisch)

516648

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

- 51 -

Using USB Media

You can connect USB devices to your TV by using •

the USB input of the TV. This feature allows you to

display/play JPG, MP3 and video ﬁ les stored on a

USB stick.

It is possible that certain types of USB devices (e.g. •

MP3 Players) may not be compatible with this TV.

You should back up your ﬁ les before making any •

connections to the TV set in order to avoid any

possible data loss. Note that the manufacturer

will not be responsible for any ﬁ le damage or data

loss.

Do not pull out USB module while playing a ﬁ le.•

CAUTION: Quickly plugging and unplugging USB

devices, is a very hazardous operation. Do not

repeatedly quickly plug and unplug the drive. This

may cause physical damage to the USB player and

especially the USB device itself.

SIDE VIEW USB MEMORY

5Vdc

Max:500mA

USB

USB Memory Connection

IMPORTANT: The TV should be switched off while

plugging or unplugging a USB device. Plug your

USB devices to the USB input of the TV. You can

connect a USB device to your TV by using the USB

input of the TV.

Note: It is possible certain types of hard disk drives

are not supported.

Connecting the TV to a PC

For displaying your computer’s screen image on your

TV, you can connect your computer to the TV set.

Power off both computer and display before making

any connections. Use a 15-pin D-sub display cable

to connect a PC to the TV. When the connection is

made, switch to PC source. See the Input selection

section. Set the resolution that suits your viewing

requirements. Resolution information can be found

in the appendix.

PC Input

(back)

Side AV Input

PC VGA Cable

(Not supplied)

PC Audio Cable

(Not supplied)

Side Audio/Video

Connection Cable

(Supplied)

SIDE AV

Note: If you connect a PC to the TV using HDMI

connection, radio interference may occur. Therefore

this type of connection is not recommended. You

should use VGA connection instead.

Using Side AV Connectors

You can connect a range of optional equipment to your

LED TV using side connectors of the TV.

For connecting a camcorder or camera , you should •

use SIDE AV socket (side). To do this, you must use

the supplied video/audio connection cable. First,

plug single jack of the cable to the TV’s AV IN socket

(side). Afterwards, insert your camera cable’s (not

supplied) connectors into the plural part of the video/

audio connection cable. Colours of the connected

jacks should match. See illustration below.

Afterwards, you should switch to • Side AV source. See

the section Input selection in the following sections

for more information.

Camera

Side AV Connection

Cable (supplied)

AV Cable

(not supplied)

Headphone

SIDE AV

To listen the TV sound from headphones, you •

should connect headphones to your TV by using the

HEADPHONE jack as illustrated above.

A02_[GB]_MB62_(01_TV)_woypbpr_1900UK_IDTV_26912LED_BRONZE19_10075029_50198576.indd 51A02_[GB]_MB62_(01_TV)_woypbpr_1900UK_IDTV_26912LED_BRONZE19_10075029_50198576.indd 51 18.08.2011 18:02:4418.08.2011 18:02:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai ALED2605TBK Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai ALED2605TBK

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info