Bedienungsanleitung Akai ATD1410X (Seite 8 von 20) (Englisch)

39728

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Combination VHF/UHF

Combination VHF/UHF Antenna (Single 75 ohm

cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from a combination

VHF/UHF antenna to the antenna jack.

Combination VHF/UHF Antenna (Separate VHF and

UHF 300 ohm twin-lead)

Connect the UHF twin-lead wire to a combiner (not

supplied).Connect the VHF twin-lead to the 300-75

ohm matching transformer (not supplied). Attach the

transformer to the combiner. Attach the combiner to

the antenna jack.

Separate VHF/UHF Antenna

Connect the 75 ohm cable from the VHF antenna and

the UHF antenna twin-lead to a combiner (not

supplied). Attach the combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-lead wire, use

the 300-75 ohm matching transformer( not supplied),

then connect the transformer to the combiner.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a converter/

descrambler box, connect the CATV 75 ohm coaxial

cable directly to the antenna jack on the back of the

television.

For Subscribers to Scrambled Cable TV service

If you subscribe to a cable service which requires

the use of a converter/descrambler box, connect

the incoming cable to the converter/descrambler

box and connect the output of the box to the

antenna jack on the back of the television. Follow

the connections shown left. Set the television to the

output of the converter/descrambler box (usually

channel 3 or 4) and use the converter / descrambler

box to select channels.

For Subscribers to Unscrambled Basic Cable with

Scrambled Premium Channels

If you subscribe to a cable service in which basic

cable channels are unscrambled and premium

channels require the use of a

converter/descrambler box, you may wish to use a

two-set signal splitter ( sometimes called a two-set

coupler )and an A/B switch box from the cable

installer or an electronics supply store. Follow the

connections shown left. With the switch in the B

position, you can directly tune any nonscrambled

channels on your TV. With the switch in the A

position, tune your TV to the output of the

converter/descrambler box (usually channel 3 or 4)

and use the box to tune scrambled channels.

Combination VHF/UHF Antenna

Single 75 ohm cable

300 ohm twin-lead wire

Splitter

Take off the Splitter

300-75 OHM MATCHING

TRANSFORMER

(not supplied)

UHF Antenna

300 ohm twin-lead wire

VHF Antenna

Single 75 ohm cable

300 ohm twin-lead wire

300-75 OHM MATCHING

TRANSFORMER

(not supplied)

COMBINER

(not supplied)

Incoming CATV

Converter/Descrambler

Splitter

A/B Switch

This television has an extended tuning range and can tune most

cable channels without using a cable company¡°supplied

converter¡±box. Some cable companies offer premium pay

channels in which the signal is scrambled. Descrambling these

signals for normal viewing requires the use of a descrambler

device which is generally provided by the cable company.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai ATD1410X Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai ATD1410X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info