Bedienungsanleitung Akai DPS24 - V1.6 (Seite 17 von 230) (Englisch)

630575

Zoom out

Zoom in

Vorherige Seite

1/230

Nächste Seite

v1.6 Operator’s Manual

REAR PANEL

ever, it is possible to patch other audio sources to appear at these outputs if you wish.

9. WORDCLOCK I/O

When wordclock is selected as the sync source, this BNC is set to receive wordclock. At all

other times, this BNC is set to generate wordclock.

10. MIDI IN/OUT/THRU

The MIDI IN connection can accept MIDI Time Code for synchronising to external equip-

ment such as sequencers.

The MIDI OUT connector can generate MIDI Time Code or MIDI Clock so that sequencers,

etc., may be synchronised to the DPS24. The MIDI OUT can also generate MIDI Controller

events such as volume and pan allowing the DPS24 to control (mix) external equipment (for

example, samples, sound modules, etc.).

The MIDI THRU connection passes MIDI data received at the MIDI Input.

11. USB CONNECTOR

This is provided for connection to a personal computer using the akSys TrackView software

or the akSysServer audio file transfer utility.

12. PS2 KEYBOARD CONNECTOR

You may attach a PS2 keyboard here to assist with naming items in the DPS24.The key map-

ping of the keyboard to DPS24 functions is shown in the appendix section.

13. FOOTSWITCH INPUT

This 1/4" jack socket can accept a footswitch for hands-free recording and playback of the

DPS24. This input can also accept an Alesis LRC˛ remote controller allowing simple remote

control (when overdubbing vocals in a separate studio are or vocal booth, for example).

The key mapping of the LRC to DPS24 functions is shown in the appendix section.

14. MASTER STEREO OUTPUT

These balanced outputs should be connected to the line inputs of your stereo mastering machine.

15. MAIN MONITOR OUTPUT

These balanced outputs should be connected to the line inputs of your main control room

monitor amplifier or powered speakers.

16. NEARFIELD MONITOR OUTPUT

These balanced outputs should be connected to the line inputs of a smaller monitoring system

powering smaller speakers. You may switch between the MAIN and NEARFIELD monitoring

systems using the NEAR switch in the monitoring section of the DPS24's control surface.

17. STUDIO FOLDBACK OUTPUTS

These outputs should be connected to a separate monitoring system (typically an amplified

headphone monitoring system) located in a separate studio recording area , vocal booth, etc..

The audio feed to these outputs is derived via AUX 3/4 allowing an independent mix to be

sent to these outputs when track laying and overdubbing.

NOTE:

When either of the STUDIO OUTPUTS are enabled, the respective AUX out put (3 and/or 4)

is disabled. This is selected in the MIXER / FX/AUX SETUP page.

18. 2-TRACK INPUT

You should connect the outputs of your stereo mastering machine to these RCA phonos. You

can monitor this input using the 2-TRACK switch found in the monitoring section of the

DPS24's control surface. However, the 2-TRACK input can also be freely patched within the

DPS24 and used as a record source if you wish.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai DPS24 - V1.6 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai DPS24 - V1.6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info