Bedienungsanleitung Akai GX-400D (Seite 8 von 22) (Englisch)

752082

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

.....

TAPE SELECTOR SWITCH

This model is equipped with a Tape Selector Switch. Use of

this switch brings out the maximum response of high

performance low noise tapes and works to change the

recording equalization according to the tape. The combi-

nation of Akai GX Heads and low noise tape hag enabled

startling progress in tone quality.

.When low noise tape is not being used, this switch must be set to

NORMAL position.

TAPE SPEED SELECTION

This model can be operated at 15, 7-1/2, or 3-3/4 ips tape

speed. Simply depress Tape Speed Selector Switch accord-

ing to desired speed. Recording time with an 1,800 ft. tape

is as follows: (stereo) 3 hrs at 3-3/4 ips; 1.5 hrs. at

7-1/2 ips: 45 min. at 15 ips.

.For professional recording, 15 ips tape speed is recommended.

DIRECT FUNCTION CHANGE CONTROL

SYSTEM

This model employs a direct function change contral

system foT speedy mode selection. The necessity of

depressing the Stop Button before changing modes is

eliminated. Further the controls are equipped with in-

dividual colored lights which indicate each operating mode.

.The use of extremely thin tape should be avoided. When the use

of such tape is absolutely necessary, it is recommended thaI the

Stop Button be depressed before changing operating mo des.

CUE SWITCH

The Cue Switch facilitates precision cueing and editing.

When the switch is set to ON position during fast forward

or rewind, a "tweeting" sound can be heard where there are

recordings on the tape. Where there are no recordings, or at

the blank space between recordings, no sound is audible.

After stopping tape at desired position, move reels while

listening to the sound, so thai the correct location is

obtained.

.When using the Cue Switch the TAPE Monitor Switch must be at

depressed position,

AUTOMA TIC STOP AND SHUT-OFF

Olle of the exclusive features of this model 'is the

Automatie Stop/Shut-Off function of the unit.

Automatie Stop

At the end of the tape, the automatie stop circuit is

activated and reel movement is stopped.

Automatie Shut-Off

For automatie shut-off, set the Automatie Shut-Off Switch

in direction of the arraw. At the end of the tape, the

shut-off circuit is activated and the power of the entire unit

is cut off.

[ID

PAUSE CONTROL

This model is equipped with a Pause Switch foT momen-

tarily stopping tape travel du ring recording or playback.

This feature is especially convenient foT editing tapes.

Simply set Pause Switch in direction of the arrow when

a certain portion of the program is not desired. Note that

the Pause lndicator Lamp will light to confirm pause mode.

Return Pause Switch to normai position to resurne record-

ing.

REMOTE CONTROL

All operating functions of this model can be remote

controlled by using Akai Remote Contral unit RC-17

optional accessory. Plugs into Remote Contral Socket on

rear panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai GX-400D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info