Bedienungsanleitung Akai MPC Studio Black (Seite 10 von 44) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630519

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Get Started

Connect, Open & Configure

1. Connect MPC Studio to a USB port on your computer, as shown in Setup > 2. Connection.

2. Power on MPC Studio and open MPC software. (The first time you open the software, you will be

asked for information required for authorization. Follow the on-screen instructions to authorize

your software.)

3. In the software, go to Edit > Preferences, and click the Audio tab. Under Output and Input,

select your sound card.

4. Click the MIDI tab. Under Active MIDI Inputs, check the MPC Studio Black box, and select

MPC Studio Black as MIDI Out Port A. Click OK.

5. Test your sound setting: Increase the volume of your computer, speakers, etc. and click Test, next

to the Device pop-up menu. You will hear a tone, indicating your sound is properly configured.

Assign Samples to the Pads

1. On MPC Studio, press Browser.

2. User the Cursor Buttons and Data Dial to navigate the file structure on your computer, and find

the samples you want to use with the MPC software.

3. You can press F3 (Play) to preview the sample before loading it, or you can press F2 (Auto) to

enable Auto Preview (selecting a sample will preview it immediately).

4. Whenever you find a sample you want to use, hit the pad you want to assign it to (it will light up

green), and press F6 (Open). The sound will be assigned to the pad as well as added to that

program for future use.

5. Repeat this process for additional pads. Hit those pads to hear your samples in action!

Record & Perform

1. Press Main to return to Main Mode.

2. Press Overdub to record-arm the sequence.

3. Press Play to start recording. You will hear the metronome count 4 beats before the recording

starts.

4. The sequence will start playing in a loop:

5. Perform using the pads! Each note will be recorded in the sequence. Even if you aren’t playing

exactly in time with the beat, the software’s Time Correct feature (T.C.) will automatically

“quantize” the notes so they are lined up in the grid.

6. You can erase notes by holding the Erase button and pressing (or holding down) a pad whose

notes you want to erase. As the audio pointer moves through the sequence, any note from that

pad will be erased.

Tip: If you are a beginning performer, we recommend playing one pad at a time. The Sequence

will keep looping, so there’s no rush to record all the pads at once!

7. To stop recording, press Stop. To play back the sequence without recording, simply press Play.

Important!

To save your project, press Shift+Save. Select where you want to save your file and enter a file name.

We recommend leaving the Also save samples box checked, so you won’t have to reload your

samples when you want to open that project. Save often so you don’t lose any of your great work!

We highly recommend going through the tutorial in the MPC User Guide: In the software, go to the

Help menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC Studio Black Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info