Bedienungsanleitung Akai MPC2500 (Seite 56 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

Chapter 8: Functions of a padChapter 8: Functions of a pad

Chapter 8: Functions of a pad

Chapter 8 : Functions of a pad

The MPC2500 has 16 drum pads. The pads perform various

function besides making sounds when hit. In this section,

you will learn about various functions of the pad.

Playing with pads

By assigning the sounds in memory to a pad, you can play

those sounds.

Below are some useful functions when playing with pads.

Switching pad banks

The MPC2500 has 16 pads, but you can play up to 64

samples by switching between the four pad banks.

The LED of the currently selected pad bank (from banks

A through D) is turned on. By pressing the desired [PAD

BANK] key, you can switch pad banks.

Full level function (FULL LEVEL key)

You can control the level of the sound by the velocity

used to hit the pads, but if you press the [FULL LEVEL]

key, the MPC2500 will play the sample at the maximum

level regardless of the velocity.

If you press the [FULL LEVEL] key, the LED will be lit,

and the full level function will be activated. To deacti-

vate this function, press the [FULL LEVEL] key again.

16 level function (16LEVELS key)

You can play a sound using 16 parameter levels as-

signed to the 16 pads.

01. Hit the pad that you wish to play in 16 levels.

02. Press the [16 LEVELS] key.

The Assign 16 Levels window will be displayed.

The Pad field displays the pad you selected in step 1.

03. In the Type field, select the type of the parameter

that you wish to play in 16 levels.

You can select the following parameters;

VELOCITY The MPC2500 will play the veloc-

ity in 16 levels.

TUNE The MPC2500 will play the pitch in

16 levels by semitone.

FILTER The MPC2500 will play the filter

cutoff value in 16 levels.

LAYER The MPC2500 will play the layer

value in 16 levels.

DECAY The MPC2500 will play the decay

value in 16 levels.

ATTACK The MPC2500 will play the attack

value in 16 levels.

When TUNE is selected, the Original key pad field

will be displays. In this field, you can specify the

pad that plays the original key pad.

04. Press the [F5] (TurnON) key.

The window closes and the LED of the [16 LEVELS]

key is turned on, which indicates you can play in 16

levels. Pressing the [16 LEVELS] key turns its LED off

and deactivates the 16 levels function.

Tips: When you select VELOCITY in the Type field, the velocity

of the pad event can be played in 16 levels, but if you select an

option other than VELOCITY, the note variation value will be

played in 16 levels. The note variation data can change the value

of a specific parameter when you play the pad’s sample. For ex-

ample, if you select TUNE in the Type field, when you hit the

pad, the note variation data of TUNE will be sent to the sampler

section with the pad event, and the TUNE value will be changed

according to the pad you played.

During Sequence recording, the Note variation data will be re-

corded with the note event and you can play back the sequence

exactly what was played. The note variation value is also used for

the Q- Link slider function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info