Bedienungsanleitung Akai MPC2500 (Seite 67 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

Recording the sample - detailed information

In this section, you will learn about several features regard-

ing the recording which were not described in the “Record-

ing the sample” section.

Recording the digital signal

Here, you will learn how to record a digital signal.

Note: You can record only from the devices whose sampling

rate in set to 44.1kHz (ex. CD player). The MPC2500

does not

support the other sampling rates.

Note: The format of the MPC2500’s digital input is coaxial type.

If your digital device has an optical output, you cannot connect

it to the MPC2500 directly. You will need an adapter.

Preparing the recording

01. Connect the external device to the DIGITAL IN which

is located on the MPC2500’s rear panel.

02. Press the [MODE] key and then [PAD 5] (RECORD)

to display the RECORD page.

03. Select the Input field and select DIGITAL.

When you select DIGITAL, a digital device MUST

be connected to the MPC2500.

04. Select the Mode field and select STEREO or MONO.

05. Play the source. Check the level meter on screen.

Note:

With the digital recording, you cannot adjust the recording level.

06. Select the Threshold field and set the threshold level

to trigger the recording.

07. Select the Time field and set the recording time.

For the next steps, proceed as described in the

“Starting the recording" section on page 55.

Recording the MAIN OUT

In this section, you will learn how to record the same sig-

nal found on the STEREO OUT of the MPC2500. With this

feature, you can add the effects to the recorded sample and

re-record it, or you can record the phrase that you created

with the sequence feature, as one sample.

Preparing the recording

01.

Prepare the system so that you can play the desired

sound by hitting the pads or playing back the sequence.

The sound that the MPC2500 will actually record

is exactly the same as the sound from the STEREO

OUT. Before going back to the RECORD mode, set

the program and sequence so that the desired sound

will be output from the STEREO OUT.

02. Press the [MODE] key and then [PAD 5] (RECORD)

to display the RECORD page.

03. Select the Input field and select MAIN OUT.

04. Select the Mode field and select STEREO or MONO.

05. Select the Time field and set the recording time.

Note : When the MAIN OUT is selected, you cannot adjust the

recording level When the MAIN OUT is selected, the recording

level is decided by the setting of Master level in the GLOBAL

page of the OTHER mode. The initial setting of the Master level

is –12dB as the output sound will not distort when many samples

are played back simultaneously. If you record one sample through

MAIN OUT with this setting, the recorded sample level is lower

than the original sample level. In this case, if you set the Master

level to 0dB, the recorded sample level is same as the original

sample level.

Note:

When MAIN OUT is selected, the level meter is not displayed.

For the next steps, proceed as described in the “Start-

ing the recording” section on page 55.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info