Bedienungsanleitung Akai MPC2500 (Seite 78 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

Chapter 12: Editing a sample

PITCH SHIFT (Changing the pitch of the sample)

With the Pitch Shift function, you can change the pitch

of the selected sample without changing the length. This

is useful when you want to change the pitch of the phrase

sample in the sequence without changing the tempo..

01. In the sample field, select the sample you wish to

change the pitch..

02. Press the [F6] (EDIT) key.

The Sample Edit window will be displayed.

03. In the Edit field, select PITCH SHIFT.

04.

In the Pitch field, set the pitch amount you wish to change..

Pitch : -12.00 - +12.00

This determines the amount of the pitch shift in semi

tone and cent step. For example, if you enter +1.00,

the sample will pitch up one semi tone. If you enter

+12.00, the sample will pitch up one octave.

05. Set the Preset field and Adjust field if necessary.

Preset : The MPC2500 uses 18 preset algorithms to

carry out the pitch shift process, so you should se-

lect a preset that closely resembles your sample’s

content. If your are not happy with the results, try

experimenting with different presets.

Each preset is further divided into A, B or C:

A :

Standard quality

pitch shift

with fast processing

B :

Better quality

pitch shift

with slower processing

C :

Highest quality

pitch shift

with slower processing.

Pitch shift Presets:

01. FEM VOX (Female voice)

02. MALE VOX (male voice)

03. LOW MALE VOX (low male voice)

04. VOCAL

05. HFREQ RHYTHM (

High frequency Rhythm section

)

06. MFREQ RHYTHM (

Middle frequency Rhythm section

)

07. LFREQ RHYTHM (

Low frequency Rhythm section

)

08. PERCUSSION

09. LFREQ PERC. (Low frequency Percussion)

10. STACCATO

11. LFREQ SLOW (Low frequency Slow music )

12. MUSIC 1

13. MUSIC 2

14. MUSIC 3

15. SOFT PERC. (Soft percussion)

16. HFREQ ORCH. (High frequency Orchestra)

17. LFREQ ORCH. (Low frequency Orchestra)

18. SLOW ORCH. (Slow orchestra)

Adjust :

You can use this to ‘tweak’ the selected pre-

set. If your selected preset is close to what

you’re looking for, but still needs a little fine

tuning, try a few different settings here un-

til you get the best result. A ( + ) value will

help improve high frequency and percussive

sounds while a ( - ) value will help improve

bass sound. Most of the time, this can be left

at zero.

06. Press the [F5] (DO IT) key.

The Keep or Retry window will be displayed after

executing the Pitch shift.

Lengthy samples will take longer to process.

New name field:

You can enter the new name for the sample.

[F2] (PLAY) :

You can audition the new sample.

[F3] (OVER W) :

You can delete the original sample and keep the new

sample.

[F4] (RETRY) :

Returns to Sample Edit window without keeping

the new sample.

[F5] (KEEP) :

You can keep the new sample with the name set in

the New Name field.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info