Bedienungsanleitung Akai MPC2500 (Seite 99 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

tuning, try a few different settings here un-

til you get the desired result. A ( + ) value

will help improve high frequency and per-

cussive sounds while a ( - ) value will help

improve bass sound. Most of the time, this

can be left at zero.

06. Press the [F5] (DO IT) key.

The Keep or Retry window will be displayed after

executing the Pitch shift.

Lengthy samples will take longer to process.

New name field:

You can enter the new name for the sample.

[F2] (PLAY) :

You can audition the new sample.

[F3] (OVER W) :

You can delete the original sample and keep the

new sample.

[F4] (RETRY) :

It returns to Pad Sample Edit window without

keeping the new sample.

[F5] (KEEP) :

You can keep the new sample with the name set in

the New Name field.

Setting a LFO (Low Frequency

Oscillator)

You can set the LFO on the pad sample in the Program. By

using the LFO, you can get a more powerful sound. For

example, if you set the Pitch in the LFO page, the pad sound

can have the vibration effect, and if you set the Level in the

LFO, the pad sound can have the tremolo effect. The

MPC2500 can set the Filter or Pan in the LFO page as well

as the Pitch or Level.

01. In the Program mode, press the [F5] (LFO) key.

The LFO page will be displayed.

In the Pgm field, you can select the Program you

wish to edit.

02. Select the desired pad by hitting it.

In the Pad field, the selected pad will be displayed.

Wave field:

You can select the wave for the LFO from

TRANGLE, SINE, SQUARE, SAW, SAW DOWN,

or RAMDOM.

Rate field (00.00 – 99.00)

You can set the cycle (speed) of the LFO. This set-

ting value is based on the Beat and Tick. The cycle

(speed) will be changed with the tempo of the se-

quence. For example, if you wish to set the cycle of

the LFO to one beat of the sequence, you would

set this value to “01.00”, if you want to set the cycle

to an 1/8 note, set it to “00.48” and so on.

Delay field (00.00 – 99.00)

You can set the delay time (the time before starting

the LFO) with the Beat and the Tick. For example,

if you wish to start the LFO after one beat from

starting from the point of triggering a sample, set it

to “01.00”.

Pitch field (0-100)

You can set a value to change the pitch of the

sample. ( Vibrate effect).

The lower this value, the less pitch variation you

will get, and vice versa the higher this value, the

more pitch variation.

Filter field (0 – 100)

You can set this value to change the filter of the

sample. (WOW effect)

The lower this value, the less the WOW becomes,

and vice verse. This parameter works is based upon

the setting in the Filter page.

Level field (0 – 100)

You can set this value to change the level of a

sample. (Tremolo effect)

The lower this value, the less tremoro effect, the

larger the value, the more tremoto effect.

Pan field (00.00 – 99.00)

You can set this value to change a pan of a sample.

(Auto-Panning).

The lower this value, the narrower the panning ef-

fect, the larger this value, the wider the panning

effect will be.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info