Bedienungsanleitung Akai MPC2500 (Seite 114 von 136) (Englisch)

630577

114

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

104

Chapter 16: Save / Load

folder inside, you can select that folder (in the lower directory) by

pressing the right cursor key. You can also move to the upper

directory by pressing the left cursor key.

Creating a new folder

You can create a new folder and select it as the destination.

01. In the Directory window, select a directory you wish

to create a new folder to.

The new folder will be created in the folder cur-

rently selected in the left list.

02. In the Directory window, press the [F5] (NEW) key.

The Name window will be opened. Enter the folder

name in the window.

For more information about setting the name, see

the “Setting names” section on page 10.

03. In the Name window, press the [F5] (ENTER) key.

The new folder will be created in the selected di-

rectory. In the Directory window, the new folder is

selected.

Saving a sample

You can save samples one by one.

01. In the To field of the SAVE page, select the destina-

tion folder.

02. In the Type field, select SAVE A SAMPLE.

03. In the Item field, select the sample to save.

You can select the sample data in the memory by

turning the DATA wheel.

04. Press the [F6] (DO IT) key.

The MPC2500 starts saving the sample.

•

When the destination folder has the data with the same name

If the destination folder already has the data with

the same name, the File Exists window will be dis-

played. To cancel the operation, press the [F4]

(CANCEL) key.

To overwrite the data in the memory card with the

new data, press the [F2] (REPLAC) key. The data in

the memory card will be replaced with the new data.

Pressing the [F5] (RENAME) key brings up the

Name window, where you can change the name of

the file you are about to save. When you enter the

name in the Name window and press the [F5] (EN-

TER) key, the MPC2500 will start to save the data.

Saving a program

You can save a program and the samples used for the

program.

01. In the To field of the SAVE page, select the destina-

tion folder.

02. In the Type field, select SAVE A PROGRAM.

03. In the Item field, select the program to save.

You can select the program data in the memory by

turning the DATA.

04. Press the [F6] (DO IT) key.

The Save a Program window will be displayed.

05. In the Save a Program window, make settings for

each field.

Save field

You can choose whether or not to save the sample

data (sounds) with the program data.

WITH SAMPLES

The MPC2500 will save the program data and the

samples used for the program.

Normally you should select this option. When you

load the saved program, the MPC2500 will load the

samples automatically.

PROGRAM ONLY

The MPC2500 will save only the program data. It

does not save the sample data. When you are sure

that the samples used for the program are in the

selected folder, you can reduce the time to save the

data by selecting this operation.

Replace same samples field

You can set how to handle files when the destination

location already has a sample with the same name.

NO The MPC2500 will not save the file with the

same name. If you loaded the data from the

memory card and edited only the program,

select NO.

YES The MPC2500 will overwrite the data with

the new data, which you are about to save.

If you have loaded the data from the

memory card and edited the sample data,

select YES.

06. Press the [F5] (DO IT) key.

The MPC2500 will start to save the data.

Note : If the destination folder already has the data with the same

name, the File Exists window will be displayed. For more infor-

mation about the File Existing window, see the “Saving a sample”

section on page 104.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info