Bedienungsanleitung Akai MPC2500 (Seite 118 von 136) (Englisch)

630577

118

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

108

Chapter 16: Save / Load

Loading a sample

You can load a sample file one by one. You can also

assign the sample to the pad.

01. Select a sample file and load it. The Load a Sample

window will be displayed.

You can listen to the sample by pressing the [F2]

(PLAY) key.

To cancel the loaded sample, press the [F4]

(DSCARD) key.

02.

Select the pad to assign the selected sample by hitting it.

When you hit the pad, the pad number will be dis-

played in the Assign to pad field.

If you do not wish to assign the sample to any pad,

select OFF by turning the DATA wheel to the left.

03. Press the [F5] (KEEP) key.

The loaded sample will be assigned to the selected pad.

Tips : You can load the “.snd” files. This includes files from

MPC3000/2000/2000XL.

• Loading Audio CD from the internal CD drive

(option)

If you select “CD” in the Load from: field, you can

load audio track in Audio CD in the internal CD

drive (optional) as well as the sample file.

01. In the File field, select the track.

You can audition the selected track with pressing

[F4] (PLAY) key.

02. Press the [F5] (DO IT)

The MPC2500 will start loading the audio track.

Note : The MPC2500 cannot load an audio track that is greater

in size than is available in the internal memory. The data size of

the selected track will be displayed in Size: field.

The maximum internal memory with EXM128 (op-

tional) is 128MB.

Approx. 12 minutes can be sampled in this manner as

you will need approx. 10MB for each track minute.

Loading a program

You can load a program file one by one.

01. Select a program file and load it. The Load a Pro-

gram window will be displayed.

To cancel the operation, press the [F4] (CANCEL) key.

02. In the Load field, select if you wish to load the

samples as well.

WITH SAMPLES

The MPC2500 will load the samples used for the

program as well. Normally select this option.

PROGRAM ONLY

The MPC2500 will load only the program file.

It does not load the samples. Select this option

when you wish to create a new program by as-

signing different samples to the saved program.

03. If you selected WITH SAMPLES in the Load field,

make settings in the Replace same samples in

memory field.

You can set how to handle the file when you al-

ready have the data with the same name as the load-

ing file in the unit.

NO The MPC2500 will not load the sample with

the same name.

YES The MPC2500 will overwrite the data by

the new data.

04. Press the [F5] (DO IT) key.

The MPC2500 will start loading the data.

•

Deleting the data in the memory before loading

When you press the [F2] (CLEAR) key instead of

the [F5] (DO IT) key in step 4., you can clear the

MPC2500’s memory and load only the selected pro-

gram in the memory.

01. In the step 4, press the [F2] (CLEAR) key instead of

the [F5] (DO IT) key.

The CAUTION window will be displayed. If you press

the [F5] (DO IT) key, the MPC2500 will start loading

the program after it clears all its internal memory.

Note : If you do this operation, all the data saved in the unit will

be deleted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info