Bedienungsanleitung Akai MPC2500 (Seite 122 von 136) (Englisch)

630577

122

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

112

Chapter 17: Chapter 17:

Chapter 17:

Connecting the MPC2500 to your ComputerConnecting the MPC2500 to your Computer

Connecting the MPC2500 to your Computer

Chapt er 17 : Connect in g the MPC 250 0 to your comp ut er

The MPC2500 supports the USB mass storage class. When you connect the MPC2500 to a PC that supports USB mass storage

class, the PC will recognize the memory card (the Internal Hard Disk (option)) in the MPC2500 as a removable media drive.

You can transfer the data between the recognized memory card /the Internal Hard Disk (optional) and the PC.

You can save the data on the memory card /the Internal Hard Disk (optional) to the PC, or you can load the data from the PC

to the memory card /the Internal Hard Disk (optional) .

You need Windows 2000/Me/XP or later version, or MacOS 9.x/10.x or later version.

Note :

The computer cannot recognize the MPC2500's internal memory directly. To save the data in the internal memory to the computer, you

need to save the data to the memory card first / the Internal Hard Disk (optional). Also, the data from the computer will be saved to the memory

card / the Internal Hard Disk (optional). To use the data in the MPC2500, load the data from the memory card / the Internal Hard Disk (optional)

Connecting the MPC2500

to a Windows - based PC

01. Insert the memory card in the card slot of the

MPC2500.

02. Press the [MODE] key and then the [PAD 2] (LOAD),

or the [PAD 3] (SAVE).

In the Load from or Save to field, select MEMORY

CARD. If you wish to load /save to/from the in-

ternal hard disk, select HARD DISK.

03.

In the LOAD page or SAVE page, press the [F4] (USB) key.

This brings up the USB page, which you use to con-

nect the MPC2500 to the PC. That is all for the

MPC2500.

04. Connect the MPC2500’s USB slave jack to the PC’s

USB host jack via USB cable.

05.

When you connect the MPC2500 to the PC for the

first time, the message, " Found New Hardware " will

be displayed and follow the instruction on the display.

Once the PC recognizes the MPC2500, its “Re-

moval” icon will be displayed in the task bar. In

the Device Manager, the MPC2500 will be displayed

as a USB Mass Storage Device.

06. In My computer, the MPC2500 is displayed as a re-

movable disk.

To save the data to a PC, select the data and drag

and drop it from the removable disk to the hard disk.

To load the data, select the data and drag and drop

it from the hard disk to the removal media.

07. When you finish the data transfer, click the “Removal”

icon on the PC’s task bar and select the “ Stop USB

Mass Storage Device - Drive( :)" .

Note: In the “ ( :)”, the alphabet is displayed, which indicates the

drive in the PC.

When you select to stop the device, the “'USB Mass

Storage Device is ready to remove safely.” dialog

box will be displayed.

08. Remove the USB cable from the USB jacks of the

MPC2500 and the PC.

Note: Make sure that you do Step 07 "Remove the device" before

disconnecting the USB cable.

Note: You can transfer the data between the MPC2500 and the

PC only when the USB page is displayed. You can not move to

another page or mode from USB page unless you disconnect the

USB cable.

Connecting the MPC2500

to the Macintosh

01. Insert the memory card to the MPC2500’s card slot.

02. Press the [MODE] key and then the [PAD 2] (LOAD),

or [PAD 3] (SAVE).

In the Load from or Save to field, select MEMORY

CARD. If you wish to load /save to/from the in-

ternal hard disk, select HARD DISK.

03. In the LOAD page, or the SAVE page, press the [F4]

(USB) key.

This brings up the USB page, which you use to con-

nect the MPC2500 to the PC. That is all for the

MPC2500.

04. Connect the MPC2500’s USB slave jack to your

computer’s USB host jack via USB cable.

05. Removal media will be displayed on the desktop.

To save the data in the computer, select the data

and drag and drop it from the removable disk to

the hard disk. To load the data from the computer,

select the data and drag and drop it from the hard

disk to the removal media.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info