Bedienungsanleitung Akai MPD226 (Seite 9 von 56) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630524

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

On Color / Off Color: These determine what colors the pad will be when it is pressed (On) and

not pressed (Off). The available settings are Off, Red, Orange, Amber, Yellow, Green, Green

Blue, Aqua, Light Blue, Blue, Purple, Pink, Hot Pink, Light Purple, Light Green, Light Pink,

Grey.

Note Mode: If Note is the selected Type, this determines whether it is in Toggle or

Momentary Mode.

Faders (Fader 01–12)

Type: The type of event that will be sent. The available settings are Aftertouch and MIDI CC.

MIDI Channel: This setting determines over which MIDI channel data is sent. The available

settings are Common, USB A1–A16, and USB B1–B16.

CC Number: If MIDI CC is the selected Type, this determines the MIDI CC. The available

range is 000–127.

MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off).

MIDI data will be sent to MPD226’s USB connection regardless of this setting.

Min / Max: If Aftertouch is the selected Type, these determine the lowest (Min) and highest

(Max) values. (If the Min is higher than the Max, the fader’s polarity will be reversed.)

Switches (Switch 01–12)

Type: The type of event that will be sent. The available settings are Note, CC, PrgChange,

PrgBank, and Keystroke.

MIDI Channel: This setting determines over which MIDI channel data is sent. The available

settings are Common, USB A1–A16, and USB B1–B16.

Note: If Note is the selected Type, this assigns the note number.

Velo: If Note is the selected Type, this assigns the velocity. The available range is 000–127.

Mode: If Note or CC is the selected Type, this determines whether it is in Toggle or

Momentary Mode.

CC Number: If CC is the selected Type, this determines the MIDI CC number. The available

range is 000–127.

Invert: If CC is the selected Type, the switches send 000 as the “off” value and 127 as the

“on” value. This determines whether the values sent are normal (Off), as described above, or

switched/inverted (On).

Program Number / Pgm: If PrgChange or PrgBank is the selected Type, this determines the

Program number. The available range is 000–127.

Msb / Lsb: If PrgChange or PrgBank is the selected Type, these determine the MSB (Most

Significant Bit) and LSB (Least Significant Bit). The available range is 000–127.

MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off).

MIDI data will be sent to MPD226’s USB connection regardless of this setting.

Key 1: If Keystroke

is the selected Type, this determines what keystroke the switch sends.

The available keystrokes are 0–9, A–Z, F1–F12, Backspace, Return, Up Arrow, Down

Arrow, Left Arrow, Right Arrow, Tab, various symbols ( , . / [ ] \ ‘ ; ), Esc, Insert, Home,

Page Up, Delete, End, Page Down, and Num 0–9.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPD226 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info