630216
25
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
23
PRESS ENTER TO TRANFER
TAP TEMPO AVERAGE – Page 8
When using [TAP TEMPO] button to set the tempo, the MPD26
averages a number of taps in order to determine the tempo. You can
set the number of taps used to determine the TAP TEMPO AVERAGE
in this field.
1. While in Global Mode, use [>] button to scroll to Tap AVG (page
8).
2. Turn [VALUE] dial to select number of taps.
3. Press [ENTER] to set tap average.
SAVE SETUP – Page 9
SAVE SETUP allows you to save any changes you may have made to
the global parameters.
1. While in Global Mode, press [>] to scroll to Globals (page 9). You
will see “Save Setup” displayed on the screen.
2. Press [ENTER] to save all the global settings on the MPD26.
SYSEX TX – Page 10
SYSEX TX allows you to transfer Preset data from the MPD26 via
SysEx. This data includes Controller Numbers, MIDI Channels and
various other parameters.
1. While in Global Mode, press [>] to scroll to SysEx Tx (page 10).
2. Turn the [VALUE] dial to select which Preset’s information you
would like to transfer.
3. Press [ENTER] to save all the global settings on the MPD26.
VERSION – Page 11
VERSION allows you to see what version of the operating system and
firmware is currently loaded onto the MPD26.
While in Global Mode, press [>] to scroll to Ver (page 11) for version
information.
TAP AVERAGE FIELD
PRESS ENTER TO SAVE
CHOOSE PRESET
SysEx transfers to the MPD26
You can also load preset data into the MPD26 from an external source by
“playing” a SysEx file into the MPD26. This can be done with a variety of
SysEx applications, many of which are widely and freely available over the
Internet.
1. Make sure that the device is connected to the MPD26 either via the USB
or the MIDI IN port.
2. Make sure that you are in Preset Mode.
3. “Play” the SysEx file on your external device or computer.
Please note that when transferring SysEx information into the MPD26, the data
will override the data of the original Preset which was sent to your SysEx
editor. For example, if you transfer Preset 5 to your SysEx editor and then
send it back to the MPD26, the data will overwrite Preset 5.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Akai MPD26 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info