Bedienungsanleitung Akai MPK25 (Seite 43 von 46) (Englisch)

630555

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

Please make sure that the MPK25 is connected to

your computer and that the computer is powered on.

The display does not light

up.

No power.

If using a power adapter, please make sure that the

adapter is plugged into a live power outlet.

Check your computer’s USB connection to confirm

that the MPK25 is recognized. If necessary,

reconnect the device and restart your computer.

MPK25 not properly

connected.

If controlling an external hardware module, make

sure that the MIDI cable is connected from the

MPK25 to the device’s MIDI IN port.

MPK25 connected after

software application has

started.

Restart the software application with the controller

plugged in.

Problem is caused by use

of a USB hub.

Unplug the MPK25 from the USB hub and connect

directly to the computer.

Software application not

set to receive MIDI data

from the MPK25.

Ensure that the MPK25 or “USB” MIDI device is

listed as an active MIDI source in your application.

Usually, the MIDI settings can be accessed through

the application’s Preferences menu.

No sound from target

device.

MPK25’s MIDI channel not

the same as application’s

incoming MIDI channel.

Make sure that the MPK25 is sending MIDI

information on the channel that the target device

expects.

Sustain pedal was plugged

in after the MPK25 was

powered on.

Turn the unit’s power off, wait a moment and then

turn it on again.

Notes sustain continuously.

Stuck notes due to

incomplete MIDI data.

Turn the unit’s power off, wait a moment and then

turn it on again.

Sustain pedal works in

reverse.

Sustain pedal was plugged

in after power was turned

on.

With the pedal plugged in, turn the unit’s power off,

wait a moment, and turn it on again.

Arpeggiator and Note

Repeat features are not

synchronized to my clock

source.

Clock source on MPK25

set to “Internal”.

In Global Mode, change the MIDI Clock setting to

“External”. Also, make sure that the software you

are using is set to send MIDI Clock to the MPK25.

Arpeggiator and Note

Repeat features are not

working and my Seq/DAW

is sending clock.

Software DAW is not in

play mode.

If your software DAW is not playing, it will not be

sending clock.

My knob or mod wheel

works in reverse.

Controller minimum value

is set higher than its

maximum.

Edit the controller and set the minimum value to be

lower than the maximum.

Transport control does not

work.

Software does not support

MMC messages, MIDI

START/STOP or the MIDI

CC mode.

Edit the transport control to send MIDI messages

instead. Make sure that the Transport mode you are

using on the MPK matches the receive modes of

your software.

I am only hearing one

sound when I hit different

pads

12 Level function is

engaged.

When engaged, the 12 Level function will map the

last hit pad to all 12 pads. Deactivate 12 Level to

return to normal operation.

The pads always play at

maximum velocity (127).

Full Level feature is

engaged.

When engaged, the Full Level function will cause all

the pads to output maximum velocity, no matter how

hard they are hit. Turn off Full Level to return to

normal operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK25 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info