Bedienungsanleitung Akai MPK49 (Seite 11 von 44) (Englisch)

630554

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PRESET NAME PRESET NUMBER

PRESET MODE

The MPK49 features different Preset banks that you can load and write to. When you turn on the MPK49, it

will automatically go into Preset Mode and Preset 1 will be displayed on the screen. You can also press

the [PRESET] button at any time to call up this mode. In Preset Mode you can load, save/copy and

rename Presets – each of these functions can be accessed through the 3 different pages. You can

navigate between these pages with the [<] and [>] buttons.

PAGE 1 – LOAD PRESET

1. While you are in Preset Mode, you can change Presets with the [VALUE]

dial below the screen. Turning the dial increments or decrements the current

Preset number and displays the screen on the right:

When you do this, you will notice that ‘PRESS ENTER’ will begin to blink.

2. Pressing [ENTER] loads the selected Preset. Pressing [<] button or

[PRESET] button cancels and returns you to the Preset that was last

selected.

PAGE 2 – SAVE/COPY PRESET

In Preset Mode, you can also save and copy a Preset to a new location. This

allows you to save any changes that you have made to the Preset.

Note that if you are saving the Preset to the same location (same preset number)

the screen will say ‘SAVE TO’ and if you are saving to a different location

(different preset number), the screen will display ‘COPY TO’.

1. While you are in

Preset Mode, press [>] button until you see the ‘SAVE TO’ screen similar to the one shown

above.

2. You can select the location where you want to save the Preset by turning the [VALUE] knob.

When you do this, you will notice that the ‘PRESS ENTER’ segment will begin to blink.

3. Press [ENTER] to save current Preset to the destination. Pressing [<] button or [PRESET] button cancels the

operation and returns you to the Preset play mode.

PAGE 3 – NAME PRESET

While you are in Preset Mode, you can also change the Preset name. This way

you can assign specific names to different Presets so you can quickly identify

and access different controller configurations.

1. To name or rename the Preset, press the [>] button until you see ‘Preset

Name’ displayed on the screen.

You will notice that the first letter of the name will begin blinking.

2. Turn the [VALUE] dial to change the blinking character.

3. To move between the characters, use [<] and [>] buttons.

4. When done, press [PRESET] again. The name will be saved.

What is a Preset?

A Preset is a collection of information about how the MPK49’s keyboard,

sliders, knobs, and pads will behave. Using Presets allows you to save

different configurations so you can quickly load them when you need them,

without having to reprogram the MPK49 every time.

DESTINATION

ENTER PRESET NAME IN

THIS FIELD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK49 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info