Bedienungsanleitung Akai MPK49 (Seite 14 von 44) (Englisch)

630554

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

SELECT PROPERTY

PRESS ENTER TO EDIT

MIDI CHANNEL FIELD

AFTERTOUCH FIELD

MIDI CHANNEL FIELD

OCTAVE SHIFT FIELD

VELOCITY FIELD

EDITING THE KEYBOARD

When editing the keyboard, please note that the changes will affect all the keys on the MPK49. The

keyboard properties you can edit include MIDI Channel, Octave, Aftertouch, and Velocity.

MIDI CHANNEL – This is the MIDI Channel on which the keyboard will be transmitting information.

OCTAVE – This is the default octave shift that will be applied to the keyboard when the current Preset is loaded.

AFTERTOUCH – Aftertouch describes pressure applied to the keys after they have been pressed. Aftertouch can

often be used to control the vibrato, sustain or decay of a sound. The Aftertouch setting on the MPK49 can be set to

either “On” or “Off”. When set to “Off”, the MPK49 will ignore Aftertouch.

VELOCITY – Velocity describes how hard the keys are struck. Most often, velocity is directly mapped to the

perceived loudness of a sound; so the harder you play the keys, the louder the sound will be. The Velocity setting on

the MPK49 can be set to either “On” or “Off”. When set to “On”, the keyboard will detect how hard the keys are

pressed and translate these values into corresponding MIDI velocities. When set to “Off”, MPK49 will output a

constant MIDI velocity, no matter how hard the keys are pressed.

1. To edit the keyboard, press the [EDIT] button to enter Edit Mode.

2. Now select the keyboard for editing by pressing one of the keys.

3. You will see Page 1 displayed on the screen (shown on the left).

4. Turn the [VALUE] dial to select the property you wish to edit

(Octave, Aftertouch, Velocity).

5. Press [ENTER] to edit the selected property.

KEYBOARD OCTAVE

1. In the first field of this page, you can set the keyboard’s MIDI channel

field by turning the [VALUE] dial.

2. Press [>] to edit the Octave shift.

3. The Octave shift field will begin to blink. Set the shift by turning the

[VALUE] dial (default shift is set to “0”).

4. When finished, press [ENTER] to return to Page 1.

KEYBOARD AFTERTOUCH

1. You can set the keyboard’s MIDI channel field by turning the [VALUE]

dial.

2. When done, press [>] to edit Aftertouch.

3. The Aftertouch field will begin to blink. Turn the [VALUE] dial to turn

Aftertouch “On” or “Off” (default is set to “On”).

4. When finished, press [ENTER] to return to Page 1.

KEYBOARD VELOCITY

1. You can set the keyboard’s MIDI channel field by turning the [VALUE]

dial.

2. When done, press [>] to edit Velocity.

3. The Velocity field will begin to blink. Turn the [VALUE] dial to turn

Velocity “On” or “Off” (default is set to “On”).

4. When finished, press [ENTER] to return to Page 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK49 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info