Bedienungsanleitung Akai MPK61 (Seite 16 von 44) (Englisch)

630553

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

MIDI PORT/CHANNEL FIELD

NOTE FIELD

PLAY MODE FIELD

PRESSURE FIELD

NOTE PARAMETERS

The following list of parameters can be accessed if the pad event type is set to Note.

MIDI CHANNEL FIELD

This field sets the MIDI Port and Channel which the pad will use to transmit

messages. You can assign pads to one of two MIDI Ports, A or B, and to one of

16 MIDI Channels on each port (i.e. B11). You may also assign the pad to the

MIDI Common Channel.

1. Use the [<] button to select MIDI Port/Channel field.

2. While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI

Port and Channel.

3. Use the [>] button to select the next field.

Note: When not used via USB, only pads assigned to port A will transmit MIDI

information via the 5-pin MIDI port on the back of the MPK61/MPK88.

NOTE FIELD

This field sets the MIDI Note Number that the pad will transmit when it is hit.

1. Use [<] or [>] buttons to select Note field.

2. While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI

Port and Channel.

3. Use the [>] button to select the next field.

Note: Software modules or drum machines are often programmed to trigger

sounds based on specific Note Numbers associated with each sample. You

may have to experiment setting different Note Numbers on the MPK61/MPK88

to find the range that is suited for your application.

PLAY MODE FIELD

Here, you can select whether the pad transmits Note On/Off information in a

standard momentary (MTY) way like a keyboard, where hitting the pad

generates a Note On and releasing it a Note Off message, or in a toggle (TGL)

way where the first hit of the pad outputs a Note On, the second hit transmits a

Note Off.

1. Use [<] or [>] buttons to select Play Mode field.

2. While in Play Mode field, use [VALUE] dial to select desired Play Mode.

3. Use the [>] button to select the next field.

PRESSURE BEHAVIOR

In this field, you can choose how the MPK61/MPK88 transmits information

when pressure is applied to the pads after they’ve been struck. If you select

PPR (Polyphonic Pressure), each pad will transmit Aftertouch information

individually. If you select CPR (Channel Pressure), all pads assigned to a

particular MIDI Channel will transmit Aftertouch information as a group (in other

words, applying pressure to any pad assigned to the same MIDI Channel, even

if it is not the pad which was originally struck, will send Aftertouch information).

When selecting

1. Use the [>] button to select Pressure field.

2. While in Pressure field, use [VALUE] dial to select “OFF”, “CPR”, or “PPR”.

Note: Aftertouch refers to MIDI information sent when pressure is applied to a

pad after it has been struck, and while it is being held down. Aftertouch is often

used to control volume, vibrato and other parameters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK61 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info