Bedienungsanleitung Akai MPK88 (Seite 11 von 72) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630552

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

NAVIGATING GLOBAL MODE

1. Press the [GLOBAL] button.

2. Use the [<] and [>] buttons to navigate through the available pages of

options (shown below).

3. Use the [VALUE] dial to change settings, values or select a message

on the selected page.

4. Press [ENTER] to accept the change or send a message or press [<]

NAVIGATING PROGRAM CHANGE MODE

1. Press the [PROGRAM CHANGE] button.

2. On Page 1, use the [VALUE] dial to select a Prog Change or

Prog+Bank message on and press [ENTER].

3. On Page 2, use the [<] and [>] buttons to move through the

different options and use the {VALUE] dial to change them.

4. Press [ENTER] to send the message.

GLOBAL MODE

In Global Mode, you can send

global messages and make general

changes to the way that your

MPK61/MPK88 functions. Global

Mode options are organized under

different pages and include the list

of options shown below.

KILL MIDI

Send an All Notes Off or Reset Controllers message Page 1

MIDI COMMON CHANNEL

Select which MIDI channel will be used as the

Common Channel.

Page 2

LCD CONTRAST

Adjust the contrast of the display. Page 3

KEYBOARD VELOCITY CURVE

Adjust how the keyboard will output MIDI velocity,

based on the force applied to the keys.

Page 4

PAD SENSITIVITY

Adjust how sensitive the pads are to the touch. Page 5

PAD VELOCITY CURVE

Adjust how the pads will output MIDI velocity, based

on the force applied to them.

Page 6

PAD THRESHOLD

Adjust the threshold of minimum force required to

activate a pad.

Page 7

KEYBOARD TRANSPOSITION

Transpose the keyboard up or down in semitones. Page 8

MIDI CLOCK

Select Internal or External MIDI Clock source. Page 9

TAP TEMPO AVERAGE

Select the number of taps to be averaged in

determining tempo.

Page 10

SAVE SETUP

Save the current global settings. Page 11

SYSEX TX

Transfer a Preset via SysEx. Page 12

VERSION

Check the current firmware version. Page 13

PROGRAM CHANGE MODE

A Program Change, often referred to as a

Patch Change, is a MIDI message used for

sending data to devices to cause them to

change to a new program. This allows you

to tell a hardware or software device which

sound to play. For example, if your

MPK61/MPK88 is controlling a piano patch

on your DAW or an external device, using a

Program Change command allows you to

easily switch to a synth patch.

There are two different types of Program Change messages on the MPK61/MPK88:

PROG CHANGE – This event will transmit a regular Program Change message (0-127) to your DAW or an

external device, allowing you to switch between 128 different program banks.

PROG+BANK – This event transmits a Program Change message (0-127), along with a Bank L (Least

Significant Bit) Change message (0-127) and a Bank M (Most Significant Bit) Change message (0-126),

which allows access of up to 16384 different program banks. You can use PROG+BANK if your DAW or

external device supports LSB and MSB.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK88 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info