Bedienungsanleitung Akai MPK88 (Seite 4 von 44) (Englisch)

630552

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

FRONT PANEL OVERVIEW

99999

15 15 15

1619

1821 22

1. LCD – The display is used for navigating

menus, displaying data, and affecting change

on MPK61/MPK88’s options and parameters.

2. [VALUE] (Push to Enter) – This dial is used

to increment and decrement Presets,

parameter values and settings. This dial also

functions as an [ENTER] button when it is

pressed down.

3. [<] AND [>] BUTTONS – These buttons are

used to navigate through the fields of menus

and options. The [<] button also functions as

a [CANCEL] button.

4. [PRESET] – This button calls up Preset

Mode. You can select and recall different

Preset programs in this mode.

5. [EDIT] – This button calls up Edit Mode,

which allows you to edit the behavior of the

keyboard, pads, knobs, buttons, faders and

default settings for each preset.

6. [GLOBAL] – This button calls up Global

Mode, where MIDI reset commands and

global system preferences are set.

7. [PREVIEW] – This button allows you to see

what value will be sent by a controller, without

actually sending the value. This gives you

precise control over your parameters and

helps avoid erroneous controller data being

sent to your devices due to the physical

position of the controller. This is especially

useful when switching between control banks

where, for example, the physical position of a

fader may not correspond to the last value

sent by the controller. Holding down

[PREVIEW] allows you to view the original

value and adjust the physical position of the

fader as necessary before transmitting any

values.

8. [PROGRAM CHANGE] – Pressing this

button will enter Program Change mode. In

this mode, you can send a Program Change

or Program with Bank Change message to a

hardware or software module.

9. TRANSPORT CONTROL BUTTONS –

These five buttons are dedicated buttons for

sending transport control commands. The

transport control buttons can be set to

transmit either MMC (MIDI Machine Control),

MMC/MIDI SysEx, MIDI START/STOP or

pre-assigned MIDI CC values.

10. 8 ASSIGNABLE KNOBS –Each 360-degree

knob can be used to send continuous control

data to a desktop audio workstation or

external MIDI device.

11. 8 ASSIGNABLE FADERS – Each fader can

be used to send continuous control data to a

desktop audio workstation or external MIDI

device.

12.

8 ASSIGNABLE BUTTONS – These buttons

can be used as MIDI CC switches or Program

Change switches. They can function in

momentary or toggle modes. When [TIME

DIVISION] has been activated, these 8

buttons are used to set the time division of

the Arpeggiator and Note Repeat features.

13. [CONTROL BANK] – The MPK61/MPK88

features 3 independent banks of continuous

controllers. Effectively, this allows you to

control up to 72 independent parameters with

the knobs, faders and buttons on the

MPK61/MPK88. The [CONTROL BANK]

button is used to switch among the 3 banks.

The LEDs above the button will reflect the

currently selected control bank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPK88 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPK88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info