Bedienungsanleitung Akai MPX16 (Seite 5 von 56) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630544

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

10. Pads: Press these pads to trigger the samples on an inserted SD card (sold separately).

The pads are velocity-sensitive, which makes them very responsive and intuitive to play.

See Operation > Editing Pads to learn more.

The pads light up different colors to indicate their current states:

• Off (no color): The pad has no sample assigned to it.

• Amber: The pad has a sample assigned to it.

• Green: The pad's assigned sample is currently playing.

• Red: The pad is currently being edited (whether or not a sample is assigned to it).

11. Pad Edit: Press this button to cycle through the available parameters that the knobs

control. See Operation > Editing Pads section to learn more.

12. Parameter Knobs: Turn these knobs to adjust the currently selected parameter shown

above each one. See Operation > Editing Pads chapter to learn more.

Rear Panel

6589

1. DC In: If you do not want to use a computer in your setup (i.e., if you are using MPX16 to

control an external MIDI module), connect this jack to a power outlet using the included

power adapter (5.8V DC, 860mA, center-positive). Alternatively, you can connect

MPX16's USB Port to a power outlet using a standard USB charger (sold separately).

2. Power Button: Press this button to power MPX16 on or off.

3. USB Port: Use a standard USB cable to connect this USB port to your computer. The

computer's USB port provides ample power to MPX16, though you may use the included

power adapter instead. You can also power MPX16 by connecting this USB port to a

power outlet using a standard USB charger (sold separately). This connection is also

used to send and receive MIDI data to and from your computer.

4. SD Card Slot: Insert a standard SD card containing samples into this slot. Use the MPX

File Conversion Utility (downloadable for free at akaipro.com/mpx16) to load samples

onto an SD card. If you choose to load samples to an SD card without using the MPX File

Conversion Utility, please see Operation > Editing Samples to make sure they are

formatted properly.

5. Rec In: Use standard 1/4" (6.35mm) TRS cables to connect these inputs to an external

audio source to record into MPX16. Control the input recording level with the Rec Gain

knob. If you want to record a mono source instead of a stereo one, connect to the left (L)

input only. Connecting a cable to either of these jacks automatically disables the

Microphone.

6. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an

external MIDI device (e.g., another MIDI controller).

7. MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of

an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).

8. Main Out: Use standard 1/4" (6.35 mm) TS cables to connect these outputs to a speaker

or amplifier system. For mono sound, connect a cable to the left (L) output only. Adjust

the volume of these outputs with the Volume knob.

9. Headphone Out: Connect standard 1/4" (6.35 mm) stereo headphones to connect this

output. Adjust the volume of this output with the Volume knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPX16 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info