Bedienungsanleitung Akai MPX16 (Seite 8 von 56) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630544

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Editing Samples

Sample Edit Mode lets you apply various editing processes to sample on a connected SD

card.

Important: You must have an SD card inserted into the SD Card Slot to enter Sample Edit

Mode.

To enter or exit Sample Edit Mode, press the Sample Edit button, and then use the Value

Dial to select the sample in the Sample field.

To select a different pad, press the Sample Edit button to exit Sample Edit Mode, and then

repeat the process above.

This is an overview of MPX16's display on its Sample Edit screen.

Use the Select +/– buttons to move the cursor between the

different fields, and use the Value Dial to change the currently

selected field's setting or value.

• Sample Name: Displays the name of the selected sample

from an inserted SD card.

• Edit Process: Displays the current edit process:

o Copy to New: This process copies the sample audio to a new sample file. The new

sample will have a subsequent number in its name to distinguish it from the original.

o Rename: This process lets you edit the sample's name. If you enter a name of a

sample that is already stored on your SD card, you will be asked if you want to

overwrite that sample or return to the previous screen.

o Delete: This process lets you delete the sample from the SD card. You will be asked

to confirm the deletion or to cancel and return to the previous screen.

o Fade In: This process gradually fades in the sample's audio using a logarithmic

curve, starting from –∞ dB at the start point and up to full volume at the end point.

o Fade Out: This process gradually fades out the sample's audio using a logarithmic

curve, starting from full volume at the start point and down to –∞ dB at the end

point.

o Extract to New: This process uses the sample audio between the start point and

end point to create a new sample file. The new sample will have a subsequent

number in its name to distinguish it from the original.

o Discard: This process crops the sample, deleting any audio between its start point

and end point.

o Stereo>Mono: This process converts a stereo sample into a mono sample. When

Left is the source, only the left channel will be used. When Right is the source, only

the right channel will be used. When Sum is the source, the left and right channels

will be summed.

o Normalize: This process measures amplitude across the sample and adjusts its

overall volume so the sample's peak is at 0 dB

o Reverse: This process causes the sample to play backwards.

• Sample Start Point (St): You can adjust this setting for edit processes that can be

applied to a specific segment of the sample.

• Sample Start Point (End): You can adjust this setting for edit processes that can be

applied to a specific segment of the sample.

• Execute: For edit processes that require confirmation, press the Value Dial to confirm

you want to apply the process (Yes) or cancel it (No).

Sample:808 HH O

Normalize

ST: 000,000,000

END: 000,000,000

Execute?>No

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPX16 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info