Bedienungsanleitung Akai professional MAX49 (Seite 13 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

496641

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

NOTE DISPLAY

Type: Determines whether the LCD will display notes as note values (e.g., C2, F#3, etc.) or note numbers

(e.g., 36, 54, etc.).

KEYBOARD

Curve: The keyboard's velocity curve. The available settings are Linear, EXP1, and EXP2.

Sensitivity: The keyboard's overall velocity sensitivity. The available range is 1-10. At 1, it would take a lot of

force to generate a velocity value of 127. At 10, the opposite is true.

PADS

Pad Threshold: The velocity threshold to trigger the pads. The available range is 0-15. This can help prevent

false triggering or make it easier to trigger the pads.

Velocity Curve: The pads' velocity curve. The available settings are Linear, EXP1, EXP2, Log1, and Log2.

Velocity Sense (Sensitivity): The pads' overall velocity sensitivity. The available range is 1-10. At 1, it would

take a lot of force to generate a velocity value of 127. At 10, the opposite is true.

TEMPO

Tempo: The global tempo as indicated in beats per minute. When MAX49 is using its internal MIDI clock, this

global tempo settings determines the speed of the Arpeggiator, Sequencer, and Note Repeat rate. The

available range is 30 – 300 BPM.

Tap Average: The number of times you would need to press [TAP TEMPO] to enter a new tempo. The

available range is 2-4.

Tempo LED: When MAX49 is using its internal MIDI clock, the [TAP TEMPO] LED will flash in time with the

current tempo setting. You can set this feature to On or Off.

CLOCK

Source: Determines whether MAX49 uses its Internal MIDI clock or refers to an External clock (e.g., from a

DAW).

CV/GATE

CV/Gate Out: This determines how data is sent out of the CV OUT and GATE OUT:

• Key/Seq: The data from the keyboard, Arpeggiator, and Sequencer will be sent out. The keyboard will

send out 1V per octave (lowest C = 0V).

• Pads: The data from the pads will be sent out, with the notes sent corresponding to the pads' note values

(if a note is assigned).

• Common (Channel): When connected via USB, the data sent to MAX49 over the common channel and

port will be sent out. When not connected via USB, the data sent to the MAX49 over the MIDI IN on the

common channel will be sent out.

• USB 1A – 16A, 1B – 16B: When connected via USB, the data sent to MAX49 over the selected channel

and port will be sent out. When not connected via USB, the data sent to the MAX49 over the MIDI IN on

the selected channel will be sent out, but Port B will be ignored.

SYSEX

Send Program: The Program to be sent via SysEx. The available options are the individual Program

numbers or ALL (all Programs). Press the VALUE DIAL to send the Program. "PROG: ___ SENT" will appear

to confirm the Program was sent successfully.

UTILITIES

Contrast: The LCD contrast. The available options are 0 to 99.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai professional MAX49 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info