Bedienungsanleitung Akai professional MPK Mini Play (Seite 7 von 32) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707154

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

19. Resonance/Release: This assignable 270º knob sends a MIDI CC message and can be switched to

its secondary function using the Knob Bank A/B button. When the Knob Bank A/B button is set to

Bank A, adjust this knob to change the Resonance setting for the internal sounds. When the Knob

Bank A/B button is set to Bank B, adjust this knob to change the the Release setting for the internal

sounds. In USB mode, adjust this knob to send assignable MIDI CC messages.

20. Reverb Amount/EQ Low: This assignable 270º knob sends a MIDI CC message and can be switched

to its secondary function using the Knob Bank A/B button. When the Knob Bank A/B button is set to

Bank A, adjust this knob to change the amount of the Reverb effect for the internal sounds. When the

Knob Bank A/B button is set to Bank B, adjust this knob to change the low band EQ setting for the

internal sounds. In USB mode, adjust this knob to send assignable MIDI CC messages.

21. Chorus Amount/EQ High: This assignable 270º knob sends a MIDI CC message and can be

switched to its secondary function using the Knob Bank A/B button. When the Knob Bank A/B button

is set to Bank A, adjust this knob to change the amount of the Chorus effect setting for the internal

sounds. When the Knob Bank A/B button is set to Bank B, adjust this knob to change the high band

EQ setting for the internal sounds. In USB mode, adjust this knob to send assignable MIDI CC

messages.

22. Volume: Controls the internal sounds volume sent to the internal speaker and the Headphone Output.

23. Speaker: Hear the internal sounds that are played with the keys and pads from here.

Note: The internal speaker is disabled when the headphone output is used.

Rear Panel

1. Power Switch: Adjust this switch to the appropriate position when powering the unit through a USB

connection or with batteries. When set to USB, with no cable connected, this button will turn off your

MPK Mini Play to save battery life.

2. Headphone Output: Connect headphones here to listen to the internal sounds triggered with the keys

and pads. You can also connect MPK Mini Play to speakers using an 1/8” adapter.

Note: Connecting this output will disable the internal speaker.

3. Sustain Input: This socket accepts a momentary-contact foot pedal (sold separately). When pressed,

this pedal will sustain the sound you are playing without having to keep your fingers pressed down on

the keys.

4. USB Port: The USB port delivers power to the keyboard and transmits MIDI data when connected to

a computer to trigger a software synth or MIDI sequencer.

Bottom Panel (not shown)

1. Battery Compartment: Install 3 AA alkaline batteries here to power the unit if not being powered

through a USB connection.

USBPOWER

USB BATT

FAVORITES

SUSTAIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai professional MPK Mini Play Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info