Bedienungsanleitung Akai Rhythm Wolf (Seite 9 von 48) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630546

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Editing Sequences

You can edit the sequences (and fills) of each pattern in two different modes, described below:

Record Step Mode and Record Performance Mode.

Record Step Mode

Record Step Mode lets you use the 16 Step Switches to enter or remove notes from the

sequence simply by pressing the corresponding Step Switches.

To enter Record Step Mode, press and hold Shift and then press Step Switch 9 (Rec Step).

To enter or remove steps:

• For the drum voices, press the pad whose steps you want to enter or remove, and then

press one or more Step Switches to enter or remove notes at those positions. The notes

are entered with the default Step Switch velocity (described below).

• For the bass synth voice, press the Bass Synth pad, and then press one or more Step

Switches to enter or remove notes at those positions. The notes are entered with the

default Step Switch velocity (described below). Also:

o To set the note value, press and hold the desired Step Switches and turn the

Tempo knob. If you are adjusting only one note, the note value will be shown in the

display. If you are adjusting multiple notes, the display will show how many

semitones up or down you are shifting them. The bass synth voice has a three-

octave range.

Each step (for both drum and bass synth voices) has a velocity, which determines how loud

the note is played.

To edit a step's velocity, press and hold the Velocity button and then press the desired Step

Switch to cycle between the available velocities: low (green), medium (amber), high (red), and

off (unlit).

To select the default Step Switch velocity, press the Velocity button to cycle through the

available default velocities: low (green), medium (amber), and high (red).

Record Performance Mode

Record Performance Mode lets you play the pads and/or 16 Step Switches to record a

sequence in real time. The notes you play will be quantized (aligned) automatically with the

steps. Your recording will be "overdubbed" onto the sequence(s).

Note: Any incoming MIDI performance will also be recorded.

To enter Record Performance Mode, press and hold Shift, and then press Step Switch 10

(Rec Perf).

To record steps:

• For the drum voices, play the desired sequence(s), and then play the pads. The pads

are velocity-sensitive; the notes will be entered at the corresponding low, medium, or

high velocities.

• For the bass synth voice, play the desired sequence(s), and then play the 16 Step

Switches as you would a piano keyboard. The black switches are the same as the black

keys on a piano, and the same is true for the white switches. The Step Switches are not

velocity-sensitive, so you may want to edit the bass synth velocities in Record Step Mode

(see Record Step Mode above to learn more).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai Rhythm Wolf Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info