Bedienungsanleitung Akai SynthStation 25 (Seite 4 von 16) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630579

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TROUBLESHOOTING

If you are encountering issues while powering on SynthStation 25, try one of the following solutions:

• If you are using battery power, make sure 4 new AAA batteries are properly inserted in the

battery compartment on the underside of SynthStation 25.

• If you are powering SynthStation 25 via USB connection to your computer (using a mini-USB

cable, not included), disconnect then reconnect it to your computer. Also, try connecting

SynthStation 25 to a USB port on your computer rather than a USB hub.

• If you are powering SynthStation 25 with a power adapter (not included), ensure the adapter is

plugged into a live power outlet. Also make sure the power adapter's voltage and amperage are

correct (in this case, 6V DC, 1A).

If you encounter any issues related to delayed, incorrect, or lack of software response, try one of the

following solutions:

• Close then reopen the SynthStation Studio app.

• Disconnect then reconnect your iPhone or iPod touch to SynthStation 25.

• Confirm that your iPhone or iPod touch is properly connected to SynthStation 25. To do this, go

to Settings  General  About in your iPhone or iPod touch, then scroll to the bottom of the

page. "SynthStation 25" should be shown.

• Turn your iPhone or iPod touch off then on again and reopen the SynthStation Studio app.

• Turn SynthStation 25 off then on again. (If you are powering it via its mini-USB connection,

disconnect then reconnect it to your computer. Also, try connecting SynthStation 25 to a USB

port on your computer rather than a USB hub.)

• Delete the SynthStation Studio app from your iPhone or iPod touch then re-download it. (Be sure

you have backed up the app on your computer before deleting it from your iPhone or iPod touch.)

SPECIFICATIONS

Note keys: 25 (velocity-sensitive)

Inputs/outputs: 1 RCA stereo output

1 1/8" stereo headphone output

1 USB-mini port

Power: Power adapter (not included):

6V DC, 1A, center pin positive,

2.1mm pin diameter, 5.5mm barrel diameter

Mini-USB cable (not included) connected to computer:

6V DC, 1A

Batteries:

4 AAA

Dimensions: 310mm x 203mm x 40mm (W x D x H)

Weight: 1.7 lb / 7.7kg

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note for Gen 1 (original) iPhone users: When using SynthStation 25, use the following steps to

connect your iPhone: put your iPhone in Airplane Mode, turn on SynthStation 25, then lastly, connect

your iPhone to the dock. You are now ready to use SynthStation 25.

The app, Akai SynthStation Studi

, is not

included. To purchase it, go to the iTunes

App Store and search for "SynthStation

Studio."

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai SynthStation 25 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info