Bedienungsanleitung Akai Tom Cat (Seite 6 von 48) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630522

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

14. Pattern Select: Press this button and then select a pattern by (A) pressing one of the 16

Step Switches to select the pattern of the same number or (B) turning the Tempo knob

(when selecting a pattern, the Tempo knob will not adjust the tempo). Press the Pattern

Select button again to return to normal operation. If you do this during playback, the

current pattern will finish before moving to the next one.

15. Last Step: Press this button to set the pattern’s length. The pattern’s length (in steps) will

appear in the display, and the same number Step Indicators will light up amber. Press

one of the 16 Step Switches or turn the Tempo knob to set the pattern’s length (in steps).

If the Seq Variation button has either A or B lit, the maximum pattern length is 16 steps. If

both A and B are lit, the maximum pattern length is 32 steps, and the minimum pattern

length is 17 steps. Press the Last Step button again to return to normal operation.

16. Main Volume: Turn this knob to set the output volume of Tom Cat’s Main Out and

Phones Out.

17. Maul: Turn this knob to set the amount of overdrive (distortion) applied to Tom Cat’s Main

Out and Phones Out.

Rear Panel

10 11

235467 98 1

1. DC In: Use the included power adapter (12V, 2A, center-positive) to connect this jack to a

power outlet.

2. Power Button: Press this button to power Tom Cat on or off.

Important: After powering Tom Cat on, let it warm up before using it. Its tuning can be

affected by the temperature.

3. Cable Restraint: You can secure a cable to this restraint to prevent it from accidentally

unplugging.

4. Kensington Lock Slot: You may use this Kensington lock slot to secure Tom Cat to a

table or other surface.

5. USB Port: Use a standard USB cable to connect this port to an available USB port on

your computer. This connection lets Tom Cat send and receive MIDI over USB to and from

your computer.

6. Main Out: Use a standard 1/4” (6.35mm) TRS or TS cable to connect this line-level output

to the input of an audio interface, mixer, amplifier system, etc.

7. Phones Out: Connect your standard 1/4” (6.35mm) stereo headphones to this output.

8. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an

external MIDI device (e.g., another MIDI controller). For more information, visit

akaipro.com to download the latest MIDI implementation chart.

9. MIDI Out/Thru: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In

of an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.). Press the

MIDI Out/Thru button to set the function of this jack. The display will indicate which is

currently selected. See Step Switches: MIDI Out/Thru above to learn more.

10. Gate Trig Out: Use a standard 1/8” (3.5mm) TS cable to connect this output to the input

of an optional external device that can receive Tom Cat’s Gate (trigger) messages.

11. Gate Trig In: Use a standard 1/8” (3.5mm) TS cable to connect this input to the output of

an optional external device to send Gate (trigger) messages to Tom Cat.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai Tom Cat Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info