Bedienungsanleitung Akai XR20 (Seite 16 von 76) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630564

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

FOOTSWITCH CONTROL

Now that we have the basics down, let's investigate some live performance options using footswitch

control. This is particularly useful if you're playing along with Patterns and Songs on the pads and can't

use your hands to punch buttons.

There are two jacks for footswitches (Start/Stop and Count/A/B/Fill). Always plug these footswitches in

before turning on power. Either normally open or normally closed types (the two most common

footswitch types) can be used; the XR20 determines which kind is in use during power-up.

Here's how to use the footswitches:

SET TEMPO

The XR20 must be stopped. Before playing a Song or Pattern, tap the Count/A/B/Fill jack footswitch

several times at the desired tempo. The XR20 will average the time between taps and derive a tempo,

the display will update the tempo with each tap. Tapping the TAP TEMPO button accomplishes the

same result as tapping the Count/A/B/Fill footswitch.

START A SONG OR PATTERN

When the XR20 is stopped, pressing the Start/Stop footswitch is equivalent to pressing PLAY. When

the XR20 is running, pressing the Start/Stop footswitch is equivalent to pressing STOP.

INITIATE A FILL WHEN PLAYING PATTERNS

When playing patterns, the Count/A/B/Fill footswitch duplicates the FILL button function.

CANCEL A TRANSITION FROM A TO B, OR B TO A, PATTERNS

When you initiate a Fill, an A Pattern will transition to a B pattern (or vice-versa) when the Fill has

finished playing. However, you can cancel this transition if desired. We've already explained how to do

this with the front panel FILL button. However, you can also use the Count/A/B/Fill footswitch. If you

press the footswitch before the fill has finished playing and hold it down until after the fill has played (i.e,

past the downbeat of the next Pattern), the XR20 will return to the original Main A or B Pattern.

EXTEND A SONG STEP WHEN PLAYING BACK A SONG

During Song playback, pressing and holding the Count/A/B/Fill footswitch until past the end of a Song

Step will cause that step to repeat. This is great if the soloist wants to take a few more bars.

ADDITIONAL INFORMATION

For more information, please see the XR20 Reference Manual. Additional information may also be

found on www.akaipro.com.

For technical support:

EMAIL: support@akaipro.com

PHONE: 1-401-658-4032 (U.S.)

TECHNICAL SPECIFICATIONS

Main and Aux outputs: SNR 94dB A-weighted

THD+N ~0.004% @ 1.38KHz

Samples: 32MB 16 bit, max 44.1kHz sample rate uncompressed PCM

Pads: 12 velocity-sensitive pads

MIDI: In, Out/Thru

Power: Input 12VDC 500mA, center pin is ground

6 AA batteries, 1.5V nominal each

Weight: 0.94 kg

Dimensions: 250mm (W) x 195mm (D) x 50mm (H)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai XR20 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai XR20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info