Bedienungsanleitung Akai XR20 (Seite 14 von 60) (Englisch)

630564

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

BASICS

HOW TO COMMUNICATE WITH THE XR20

 The Cursor

When the XR-20 wants you to enter a number in the "Dialog" box, the display will show the

previously-entered number (or the default number), and the first digit will have a small underline

called the cursor. If the cursor is not present, the number is there for reference only. You are

expected to enter something only if the cursor is present.

 The INC / DEC Buttons

The two small buttons with the up arrow and down arrow symbols (next to the number keys) are

called the INC / DEC buttons respectively.

Pressing the INC button once increases the value of the entire number indicated by the cursor (not

just a single digit) by one. Pressing the DEC button once decreases the value of the entire number

indicated by the cursor (not just a single digit) by one.

Example: If the display shows 00 and you want to enter 01, tap the INC button once.

These buttons, as well as the PAGE buttons, also have a "scroll" feature. If you press and hold a

button, after a short pause the display will either increment or decrement at a rapid rate.

 The VALUE dial

In addition to the INC / DEC buttons, you may also use the large VALUE dial to quickly increment

and decrement through values and settings. Turn the dial clockwise to increment through the

available values, or turn the dial counter-clockwise to decrement.

 The NUMBER buttons

The number buttons (0-9) can also be used to directly input values into the XR20. Please note

that when using the number buttons it is important to enter leading zeros, if necessary. If a value

to be edited is a two-digit number, you must enter a two-digit number. If the number is a three-digit

number, you must enter a three-digit number. If necessary, enter a leading 0 (i.e., a zero at the

beginning of the number) to fill out the required number of digits.

Example: The beat length is a three-digit number. To enter a beat length of 16, enter 016.

 Automatic Revert

This feature may confuse you at first, but save you from potential problems as you become more

familiar with the machine. If all the required digits of a number aren't entered within two seconds,

the display will revert back to the previous number, with the cursor under the first digit of the

previous number. This is handy because if you start to enter a new number, but then change your

mind halfway through, you don't have to key in (or remember) the original number again—just wait

two seconds, and the display will revert to the original setting.

 Buttons that Toggle

Some buttons (SYSTEM SETUP, RECORD SETUP, PATTERN/SONG, PRESET/USER,

EFFECTS) "toggle" between two states. Each button press sets the switch to its alternate state.

Example: Press the PATTERN/SONG button once to change from Pattern to Song; press

again to change from Song to Pattern.

Example: Press RECORD SETUP to call up the Record Setup menu; press RECORD

SETUP again to exit the Record Setup menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai XR20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai XR20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info