Bedienungsanleitung Akai XR20 (Seite 23 von 60) (Englisch)

630564

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Note that if you edit a

Drum Set, any Pattern

using that Drum Set

will be affected.

SELECTING, EDITING AND CREATING DRUM SETS

What is a Drum Set?

The XR20 features different “sets” of sounds which you can use in your Patterns and Songs. A

Drum Set is a collection of settings that affect the Drum, 1-Shot and Synth sounds within the set

as well as the mix parameters and effects setup. The XR20 includes 100 Preset and 100 User

Drum Sets. Note that edited Preset Drum Sets may only be saved in a User Drum Set location.

Each Drum Set includes the following:

 DRUM / 1-SHOT SOUNDS – These are the drum and 1-shot sounds which are loaded

when the Drum Set is recalled.

 SYNTH SOUNDS – This is the Synth sound which is loaded when the Drum Set is recalled.

 PAD PARAMETERS – These are the pad and parameter settings associated with the Drum

Set. These settings include volume, panning, tuning, filter, etc.

 EFFECTS SETTINGS – These are the effects settings which will be recalled the next time

that the Drum Set is selected and include Reverb, EQ, and Compression.

SELECTING A DRUM SET

1. Press the DRUM SET button.

2. The currently selected Drum Set’s name is

displayed on the top line and the set number is

shown on the bottom line. To select the drum and

1-shot sounds to be used with this set, press the

DRUMS or 1-SHOT button. To select the synth

sounds to be used with this set, press the SYNTH

button.

3. Enter the desired Drum Set number (from 00 to 99) with the number buttons, INC/DEC

buttons or the VALUE dial. (With the number buttons, enter a leading zero if necessary).

Note: User Patterns will remember the selected Drum Set assignments. Preset Patterns have fixed Drum

Set assignments; if you exit from the Preset Pattern, the XR20 will forget any assignment you made.

CREATING AND EDITING DRUM SETS

The XR20's 12 pads can be assigned to various drum sounds, with different levels, tuning,

panning, triggering mode, output jack assignment, etc. Each set of pad parameters is given a

number and collectively called a Drum Set. Drum Set assignments have their own dedicated

memory and can be thought of as equivalent to the "programs" or "patches" found in

synthesizers. Note that A and B User Pattern share Drum Set assignment.

General instructions for Drum Set creation are:

1. Press the DRUM SET button.

2. Use the PAGE (RIGHT and LEFT) buttons to select different

"pages" of functions; the display's lower right window shows

the page number. The Drum Set pages are described below.

3. Select the instrument layer which you would like to edit (drums, 1-shot, synth) by pressing

the corresponding button.

4. Adjust values on pages, if necessary, as described for each page.

5. After making all needed changes, save the Drum Set if desired (see ‘Saving Your Drum

Sets’ section), then press DRUM SET again to exit.

Note: To select sounds for the 1-Shot or Synth section of the kit, press the corresponding button for these

sections and then edit the parameters the same way you would for the Drums.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai XR20 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai XR20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info