Bedienungsanleitung AKO BK 1201 (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

520580

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Glen Dimplex Deutschland GmbH bk bs-en_ba 06/09/B

Am Goldenen Feld 18, D-95326 Kulmbach

www.dimplex.de

kundendienst.hauswaerme@dimplex.de

3. Operation

Do not use the device as a chan-

ging table heater!

The radiator heats the objects or

persons upon which/whom it is

directed without also directly

heating the indoor air.

The radiator can be tilted down-

wards by a maximum of 40°.

Caution! Adjustments may only

be made when the device is fully

cooled. Danger of burns!

The desired heating level can be

set by pulling the cord switch

once or repeatedly.

The set heating level can be read

in the display window.

In position 0, the heating device

is switched off.

W = output power in watts.

4. Faults

If the heating device does not give off heat, check the following

points:

• Is the display at “0”?

• Is the fuse in the fuse box switched on?

If the fault cannot be corrected, please contact your electrical

retailer.

If necessary, you can also call the Glen Dimplex Deutschland

service hotline.

Tel.: +49 (0) 9221 709-564

Fax: +49 (0) 9221 709-589

To process your order, the device type, the production number

(E number) and the device’s production date (FD number) are

required. These specifications can be found on the device’s

type plate. Repairs and corrective measures must only be car-

ried out by a qualified electrician or the after-sales service.

5. Cleaning

Switch off the device and let it cool down before cleaning it.

Caution! Do not touch the reflector or heating element with bare

hands.

The outer surfaces of the device can be cleaned with a damp

cloth and then dried thoroughly.

No scouring agents or polishes should be used.

Dust which gathers inside the device can be removed using a

brush with soft, long bristles.

If the device is heavily soiled, it should be cleaned by a specia-

list.

6. Changing the Heating Element

A heating element may only be changed by a specialist.

Disconnect the device from the power supply and allow it to

cool.

Do not touch the heating element or reflector with bare hands.

Use a cloth to protect the surface.

- Loosen the front grill screws (A) and remove the front grill.

- Remove push-on connections using a suitable tool.

- Pull out the two fixing brackets (B).

- Remove the heating element.

- Insert new heating element.

Carry out assembly in reverse order.

7. Technical Data

Connection voltage: 1/N/PE 230 V~

Degree of protection: IP24 (splash-proof)

Protection class: I (with protective conductor)

8. Warranty

This product is supplied with a two-year warranty according to

our terms of guarantee.

9. Note on Disposal

Do not dispose of the unit with general household

waste. The unit must be taken to a local waste dispo-

sal plant.

Type Display 0 Display 1 Display 2 Display 3

BK 1201 Off 1200 W

BK 2001 Off 800 W 1200 W 2000 W

BS 1201 Off 600 W 1200 W

BS 1801 Off 600 W 1200 W 1800 W

BK 1201 BK 2001 BS 1201 BS 1801

Nominal

power

1,2 kW 2,0 kW 1,2 kW 1,8 kW

Dimen-

sions

(W x H x D)

768 x 100 x 92 mm 526 x 140 x 92 mm

Weight 1.60 kg 1,70 kg 1,55 kg 1,65 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AKO BK 1201 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info