Bedienungsanleitung AKO H 260-4 (Seite 3 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

520602

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Installation and Operating Instructions

Bathroom fan heater H 260/4

1. Important Information

Keep these instructions in a safe place and pass them on to

possible future owners.

• The device is only suitable for room heating within enclosed

rooms.

• Repairs and corrective measures may only be carried out by

a qualified technician.

• Disconnect the power supply in the event of a fault (pull out

the device plug or switch off the fuse).

• Do not cover the heater with any objects; fire ha-

zard!

The device carries the symbol shown on the right,

which indicates that the heater must under no cir-

cumstances be covered with any objects.

• Observe the minimum clearances.

• Caution! The outer surfaces of the device, and in particular

the air outlet grid, become hot during operation.

• Children or persons who are not capable of operating the

device safely must not operate the heater. Ensure that child-

ren do not play with the device.

• Caution! Potential dangers can arise when the device swit-

ches on automatically, e.g. devices which have been cover-

ed or blocked by objects since they were last used can

cause fire.

• Do not operate the heater in rooms where highly inflamma-

ble substances are used (e.g. solvents, etc.).

• Connecting lead must not be laid over the device.

2. Technical data

Heat output: 2000 W

Supply voltage: 1/N/PE~, 230 V, 50 Hz

Degree of protection: IP24

Safety class: I (with protective conductor)

Dimensions: (W x H x D) 300 x 405 x 120 mm

Weight: 3,25 kg

3. Installation

The heater must only be installed and operated on a vertical

wall as shown.

Installation below a wall socket is not permissible.

The device plug must be accessible after installation.

Install the device in such a manner that the controls cannot be

touched by a person in the bathtub or under the shower.

In addition, a minimum clearance of 750 mm between in-

flammable objects e.g. curtains, towels or heat-sensitive pla-

stics, and the front of the unit must be maintained.

The device is mounted to the wall with 3 screws. The enclosed

plastic bag contains screws and dowels.

Observe the minimum clearances! Dimensions in mm.

Mounting Instruction

- Unlock the wall bracket (A) and remove from the device.

- Drill mounting holes for the wall bracket and insert the

dowels.

- Align the wall bracket and firmly screw it onto the wall.

- Hang the device on the wall mount.

- Pivot down the heater and push into place (B).

4. Electrical Connection

The voltage marked on the type plate must correspond to the

supply voltage (A.C supply only).

When the power line of this device is damaged, it must be re-

placed by the manufacturer or after-sales service, or by a simi-

larly qualified person, in order to avoid risks.

Due to inadvertant resetting of the thermal cut-out, this ap-

pliance must not be supplied through an external switching de-

vice.

250 300

250

405

280

308

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AKO H 260-4 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info