Bedienungsanleitung Al-ko 4855 SP (Seite 26 von 344) (Alle Sprachen)

592620

Zoom out

Zoom in

Vorherige Seite

1/344

Nächste Seite

Translation of original user instructions

Petrol lawnmower

Starting the motor

Caution - risk of poisoning!

Never leave a motor running in an enclosed

space.

Caution - Risk of injury!

Do not tilt the lawnmower while starting.

▪ Start the motor only when the blade is mounted

(thebladeactsasaywheelmass)

▪ If starting the motor when hot do NOT use the

choke or primer button

▪ Do not change the motor controller settings

 Do not start the equipment if the outlet shaft is not

covered by one of the following parts:

 Grass catcher

 Deectorplate

 Mulch kit

 Be particularly careful when operating the starter

switch - follow the manufacturer's instructions

 Keep your feet at a safe distance from the cutting

gear

 Start the lawnmower where the grass is shorter

hold it ( 16) - the brake handle does not lock.

3. Pull out the starter cord sharply, then allow it to

slowly rewind ( 17).

4. When the motor has warmed up (about 15–20

seconds), set the throttle lever to a position

between min and max.

with remote throttle control, with primer ( 16)

1. Set the throttle lever to position max ( 12/1).

2. Press the primer button 3 times at intervals of about

2 seconds ( 15). If the temperature is below

10 °C, press the primer button 5 times.

3. Pull in the safety brake handle on the handlebar and

hold it ( 16) - the brake handle does not lock.

4. Pull out the starter cord sharply, then allow it to

slowly rewind ( 17).

5. As soon as the motor starts running, set the throttle

lever for the desired motor rpm, at a position

between min and max.

Starting electrically (optional)

Electrostart with primer ( 13)

1. Set the throttle lever to the "S TA R T " position

( 13/1).

2. Press the primer button 3 times at intervals of about

2 seconds ( 15). If the temperature is below

10 °C, press the primer button 5 times.

3. Pull in the safety brake handle on the handlebar and

hold it ( 16) – the brake handle does not lock.

4. Turn the ignition key fully to the right in the ignition

lock ( 18).

5. As soon as the motor starts running, release the

ignition key (it returns automatically to position "0").

6. According to the desired motor speed, set the

throttle lever to a position between min and

max.

Starting manually

with remote throttle control, with choke

1. Set the throttle lever to position max

( 11/1).

2. Pull in the safety brake handle on the handlebar and

hold it ( 16) – the brake handle does not lock.

3. Pull out the starter cord sharply, then allow it to

slowly rewind ( 17).

4. When the motor has warmed up (about 15–20

seconds), set the throttle lever to a position

between min and max.

with remote throttle control, without primer/choke

1. Set the throttle lever to position max ( 12/1).

2. Pull in the safety brake handle on the handlebar and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko 4855 SP Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info