Bedienungsanleitung Al-ko BMP 14000 (Seite 19 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Italienisch, Polnisch, Schwedisch)

601993

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Product description

477 347_a 19

Scope of supply

The garden pump is supplied ready-to-use, with

filter, sleeve, suction hose, and operating instruc-

tions.

TRANSPORT

Transport the engine only when the fuel tank

is empty.

Always transport the engine with the spark

plug upwards, otherwise the following may

occur:

➯

Generation of smoke

➯

Starting difficulties

➯

Soot on spark plug

CHECKS BEFORE OPERATION

WARNING!

Always perform a visual check prior to

start-up. Do not operate the machine if

the operating and/or fastening parts are

loose, damaged, or worn.

Check the general state of the engine

Check the exterior and underside of the en-

gine for indications of an oil or petrol leak.

Indications of damage

All nuts and bolts must be tight.

All guards and covers are fitted.

Fuel level

Engine oil level

Air filter insert

ASSEMBLY

Setting up the equipment

1. Prepare a flat and firm location.

2. Erect the unit horizontally and safe from the

risk of flooding.

➯

The unit must be protected from the rain

and direct water jets.

Connecting the suction line (fig. 6)

1. Select the length of the suction line in such a

way that the pump cannot run dry. The suction

line must always be at least 30 cm beneath

the surface of the water.

2. Connect the suction line (6). In doing so, make

sure that the connection is tight, but do not

damage the thread.

➯

We recommend using flexible lines at the

pump inlet (6). This ensures that mecha-

nical pressure or tension cannot be ex-

erted on the pump.

3. Always lay the suction line with an upward

gradient.

Fitting the pressure line (fig. 5)

1. Fit the pressure line. In doing so, make sure

that the connection is tight, but do not damage

the thread.

2. Open all shut-off devices (valves, spray nozz-

les, water cock) in the pressure line.

FILLING WITH FUEL

Safety

WARNING!

Danger of fire! Petrol is highly inflamma-

ble!

Use only appropriate containers to store pe-

trol.

Refuel outdoors only

Do not smoke when refuelling

Do not open the tank cap when the engine is

running or hot.

Renew the tank or tank cap if damaged.

Always close the tank lid firmly

If petrol has leaked out:

Do not start the engine

Avoid start attempts

Clean the machine

CAUTION!

Fill with oil before starting up.

Filling with oil

1. Unscrew the oil dipstick (8), and insert the fil-

ling aid.

2. Fill with oil.

3. Remove the oil filling nozzle, and screw the

oil dipstick (8) back in.

Oil recommendations

Engine oil is a decisive factor on the performance

and lifetime of the engine. Use an engine oil which

fulfils the requirements for API service class SF or

higher (or equivalent).

Check the API service label on the oil container

in order to ensure that the letters SF or those of a

higher (or equivalent) class are present.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko BMP 14000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info