Bedienungsanleitung Al-ko Easy Crush MH 2800 (Seite 19 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

601591

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

Maintenance and care

440565_b 19

1. Switch off the shredder and disconnect from

the mains connection.

2. Unscrew locking screw (9/1) and remove up-

per shredder part (9/2).

3. Remove the counter blade with guide plate

(10/1) by loosening the three M8 nuts (10/4).

4. Loosen and remove countersunk head

screws M8x10 (10/2).

5. Remove and turn blade (10/3). Replace the

blades if both sides are dull.

6. Secure blade (10/3) using the countersunk

head screws M8x10 (10/2) and turn or replace

the second blade.

7. Next, attach the counter blade with guide

plate (10/1) again and tighten the M8 nuts

(10/4).

8. Finally, attach and screw the upper shredder

part tight.

Care

Remove dirt and material residues after every

use.

Do not clean the machine with running water

or high-pressure.

Do not use any cleaning agents or solvents.

Use a soft brush or cloth for cleaning.

STORAGE

Clean the shredder after its use. Store it in a dry,

lockable place out of the reach of children.

Perform the following tasks when storing during

the winder period:

1. Switch off the machine and disconnect from

the mains connection.

2. Wait for the cutting disk to stop moving.

3. Unscrew locking screw (9/1) and remove up-

per shredder part (9/2).

4. Remove coarse and wet materials to be

shredded from the inside of the shredder.

5. Spay oily care spray ( e.g. AL-KO Multispray

art no. 112890) onto the shredder blade

(10/3).

6. Empty the grass catcher.

7. Finally, attach and screw the upper shredder

part (9/2) tight again.

8. Store the shredder vertically.

WORKING BEHAVIOUR AND WORKING

TECHNIQUE

The shredder is only partly suitable for shred-

ding soft, very juicy waste (e.g. pome fruits,

wet plant waste). These materials should be

directly composted, as they quickly compact

themselves.

The shredder is best suitable for shredding

long-stem, hard or already dried stems of

flowers, shrubs, bushes and pruning.

Shred branches shortly after cutting to

achieve optimum results.

Soft materials to be shredded should always

be processed alternating with branches to

prevent clogging of the cutting disk.

Principally, only feed materials to be shred-

ded after the machine was switched on.

Feed materials to be shredded are pulled

in. Forcefully push against thicker branches,

otherwise the motor will be overloaded.

Only feed as much materials to be shredded

to ensure that hopper and upper shredder

part do not clog.

Empty the grass catcher on a regular base,

as overfilling can cause materials backing up

in the cutting unit.

Refer to "Transporting the shredder" for mo-

ving the shredder to a new location.

WARNING!

Risk of injury due to ejected parts!

Ejected plant parts can cause severe in-

juries!

Always wear personal protective equip-

ment when working with the shredder.

DANGER!

Risk of injury and damage to the ma-

chine if used other than according to the

designated use!

Ejected parts can cause most severe in-

juries!

Do not feed stones, soil, glass, textiles,

plastic or metal parts into the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko Easy Crush MH 2800 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info