Bedienungsanleitung Al-ko HW F 1004 (Seite 11 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

601989

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

• Make sure that the device is protected from

rain and any direct exposure to water.

When attaching the suction and pressure

hoses, make sure that they do not exert a

tension on the device. We recommend the

use of flexible hoses at the pump inlet (13)

and outlet (3). If you have any questions,

ask your retailer.

When operating the system (automatic

operation), take appropriate measures to

ensure that damage due to flooding can-

not occur if the system should malfunction.

This can be ensured, for instance, by

installing an alarm system or a reserve

pump.

Attaching the suction hose

Choose a hose which is long enough so

that the device will not suck in air and run

dry. The hose should be at least 30cm

under the surface of the liquid to be

pumped while the pump is in operation.

• Attach the suction hose. Make sure to screw

it in tightly, but take care not to damage the

threads.

If the liquid to be pumped is deeper than

4 m, you should use a suction hose which

is larger than 1“ in diameter for the best

performance. We recommend our AL-KO

suction set (14), which consists of a

suction hose, strainer and non-return

valve. The suction set is available at your

local retailer’s.

GB 3 Translation of original user instructions

• When laying the suction hose, make sure

that it is lower than the system.

If the suction hose is laid so that it is higher

than the device, bubbles will be- come

trapped in the line and the pump will suck

air.

Attaching the pressure hose

• Screw the connection nipple (17) with the

round seal ring (18) in the pump outlet (3).

• Screw the angular nipple (15) with the flat

seal (16) on the connection nipple (17) and

rotate the angular nipple in the desired direc-

tion.

• Attach the pressure hose. Make sure to

screw it in tightly, but take care not to dam-

age the threads.

Filling the pump

Before putting your domestic water sys-

tem into operation, you must fill the pump

chamber with water until it overflows to

achieve full suction power. Do not operate

the pump while it is dry because this will

cause serious damage to the pump.

• Remove the filler screw (2).

• Pour water into the opening until the cham-

ber of the pump (12) is full.

• Replace the filler screw (2) and tighten it.

Switching on the system

• Open the pressure line (open valve, sprayer,

tap, etc.).

• Plug the electric cable into the socket. The

pump will automatically begin to run.

• As soon as the flow of water is cleared of air

bubbles trapped in the line, close the pres-

sure line. When the pressure has fallen and

the reservoir is full, the pump will automati-

cally switch off. Your domestic water system

is now ready for operation.

Switching off the system

• Switch the system off by unplugging the

electric cable from the socket.

Maintenance and Cleaning

Before beginning any maintenance or

cleaning work, make sure that the device

has been unplugged and take precautions

to ensure that it cannot be switched on

during work!

Cleaning the system

If you have used your domestic water system to

pump chlorine water (swimming pool water) or

liquids which leave a residue, flush your pump

out with clear water after use.

Cleaning the filter

• Remove the screw plug (12) from the drain-

age opening, empty the filter chamber and

close the drainage opening again

• Unscrew the filter cover (14) with the help of

the filter spanner.

• Remove the filter (22) from the pump head

and clean it under flowing water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko HW F 1004 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info