460709
11
Zoom out
Zoom in
Vorherige Seite
1/106
Nächste Seite
Log splitter
GB 2
No other persons should be present within the
working area of the log splitter. Special heed
should be paid to children and animals.
The user of the unit bears responsibility for
accidents involving other persons or their prop-
erty. The working area should be kept free of
timber pieces and other objects – risk of stum-
bling.
Safety equipment
Motor circuit breaker
The motor circuit breaker switches the motor off
in the event of overloading of the log splitter. The
motor circuit breaker function should not be
deactivated.
Proceed as follows if the motor circuit breaker
deactivates the log splitter:
1. Disconnect the log splitter from the mains
power supply.
2. Remedy the cause of overloading.
3. Re-establish the power connection after
allowing the unit to cool for several minutes
and switch on the log splitter.
Connection cable
Only rubber cable complying with the H07RN-F
quality standard stipulated in VDE 0282 Part 14
with a wire cross section of min. 2.5 mm² should
be used.
The max. permissible cable length is 10 m. A
longer cable impairs the motor performance and,
consequently, the function of the log splitter.
The connection cable, plug and connection
socket should be free of damage.
Repairs to the connection cable, plug and con-
nection socket should only be realised by a
specialist electrical firm or workshop. A defective
connection cable (e.g. with cracks, cuts or bends
in the insulation) should not be used.
Plug connections should not be exposed to
damp or water.
Caution!
Do not damage or sever the connection
cable.
Proceed as follows in case of damage:
1. Disconnect the connection cable immediately
from the mains power supply.
Electrical requirements:
KHS
3700, KHS 5200 models
230 V/50 Hz current
Min. connection cable cross section = 2.5 mm²
Min. mains connection fuse protection = 16 A
Correct use
The log splitter is designed for private use in the
home and garden.
The log splitter is designed exclusively for the
following applications:
Splitting freshly-cut timber that does not
exceed the dimensions specified in the tech-
nical data.
Incorrect use
Splitting of timber containing metal compo-
nents such as nails, wire, metal braces, etc.
is prohibited
Operation in potentially-explosive atmos-
pheres is not permitted
Any other utilisation above or beyond correct
use is prohibited.
Unit description (Illus. A/B)
1 Protection cover
2 Log pusher
3 Log guide tubes
4 Splitting wedge
5 Piston rod
6 Transportation bracket
7 ON/OFF switch on electric motor
8 Operating lever
9 Rear feet (only KHS 5200)
10 Support foot (only KHS 5200)
11 Park position transport wheels
(only KHS 5200)
12 Front feet (only KHS 5200)
13 Front cross member (only KHS 5200)
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

al-ko-khs-5200

Suche zurücksetzen

  • stammschieber läuft nach vorne und ganz langsam zurück Frage zu wenig Hydrauliköl und wie ist die Pflege und Wartung Eingereicht am 2-5-2019 22:04

    Antworten Frage melden
  • wo kann ich bei dem Al-ko KHS 5200 das Hydrauriköl nachfüllen Eingereicht am 28-10-2017 14:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Al-ko KHS 5200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info