Bedienungsanleitung Al-ko lhs 6000 (Seite 14 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

601615

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Log splitter

GB 3

Unpacking/Assembly

Caution!

The log splitter should only be used

when all its component parts have been

completely assembled.

1. Check the package contents (Illus. A). Inform

the dealer if deficiencies are detected.

Note:

Tools required for assembly are depicted

in Illus. C. These are not included in the

scope of delivery.

Mounting the control arms

1. Grease the control arm bearing position top

and bottom (Illus. 2).

2. Insert the control arm and tube in the trans-

verse connection recess (Illus. 2).

3. Insert the retaining pin from above past the

tube to the left and secure below with the

washer and split pin (Illus. 3).

Adjusting the retaining claws

The retaining claws can be adjusted to suit the

diameter of the timber. They should be set to the

same dimension on both sides.

1. Loosen the star grip on the retaining claw

and adjust longitudinally to suit the timber di-

ameter (Illus. 4).

2. Tighten the star grip firmly again.

Mounting the splitting cross

1. Screw the fixing screw (Illus. 5-1) somewhat

into the splitting cross.

2. Mount the splitting cross and screw the fixing

screw into the recess in the splitting blade to

draw the splitting cross upwards completely.

3. Secure in the end position with the locking

nut (Illus. 5-2).

Mains connection

The power supply is established via a

switch/plug socket combination (Illus. A-8).

The switch is fitted with an integrated undervolt-

age release. This prevents the motor from start-

ing again spontaneously in the event of a power

cut. The motor can only be restarted by pressing

the green activation button.

1. Plug the connection cable into the unit.

2. Connect the cable to the mains supply.

Note:

Check the direction of rotation of the

motor in the case of a log splitter with a

three-phase current motor (LHS

7000).

The direction of rotation should corre-

spond to the arrow on the fan cover. A

polarity reversal should be realised in

the plug with the phase inverter if this is

not the case.

Warning!

An incorrect direction of rotation will

damage the hydraulic pump.

Plug polarity reversal

1. Press in the phase inverter in the plug with a

straight screwdriver and turn through 90°

(see Illus. 6).

2. Establish the power supply and check the

direction of rotation of the motor again.

Operation

Caution!

The log splitter should not be operated if

components (e.g. the protective hoops)

are missing or defective or the connec-

tion cable is damaged.

Prior to every use

1. Conduct a visual inspection of the log split-

ter.

2. The log splitter should not be operated if

components are missing, defective or loose.

3. Visually inspect the connection cable. A

defective connection cable (e.g. with cracks,

cuts, crushing damage or bends in the insu-

lation) should not be used.

4. Visually inspect the hydraulic components for

leaks.

Log splitter start-up

Caution!

The log splitter should only be used by

one person.

1. Position the log splitter horizontally on a

level, firm surface.

Do not deposit the log splitter on the connec-

tion cable!

2. Lay the connection cable so that it cannot be

damaged by bending, crushing or otherwise.

3. Loosen the star grips from the housing,

unfold the feet outwards, securing them with

the star grips.

Translation of original user instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko lhs 6000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info