Bedienungsanleitung Al-ko Motorhacke AL-KO MH 5000 (Seite 12 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

601546

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Translation of original user instructions GB 2

Store fuel only in containers specifically designed

fort he storage of such materials.

Add fuel outdoors only. Do not smoke when

fuelling!

Never open the cap of the fuel tank, or add fuel,

while the engine is running or the unit is hot.

Always use a funnel or a filling pipe for adding

fuel to avoid the spilling of the fuel onto the

engine, the cover ort he ground.

If the fuel overflows the engine must not be

started. The unit is necessary to be cleaned. In

no case the unit is allowed to be started until the

petrol vapours disperse.

For security reasons always replace the fuel tank

and its cap when being damaged.

Risk of burning injuries!

The exhaust pipe and parts close to it may

be hot up to 80°.

Replace the damaged parts of the exhaust pipe.

Do not change the setting of the engine regula-

tor.

Never run the internal-combustion engine inside

a closed room – intoxication risk!

Spare parts and accessory

Only use the original spare parts and original

accessory.

The producer reserves all rights to change the

construction or configuration.

Safety symbols on the unit

Read the operating instructions

before operating the unit.

Rotating unit. Keep hands and

feet from the unit.

Use

Designated use

This unit is determined for processing in advance

hoed soil.

The unit is not suitable to process the solid soil,

e.g. firmly down-trodden lawn.

Other use of this device with original accessories

is allowed only for the determined purposes.

Operating times:

Please observe the operating hours permitted

locally.

Assembly

The assembly of this machine – see the figures

1 - 16.

Parts description

1 Clutch lever

2 Throttle lever

3 Lever for reverse gear

4 Starter rope

5 Transport wheel

6 Chopping knife

7 Protective glass

8 Guard

9 Brake spur

Putting into Operation

Put the machine into operation only after its

complete assembly.

Tank Oil and Petrol before the First Putting

into Operation! It is necessary to respect

unconditionally instructions in enclosed

operating instructions for petrol engine

delivered by engine producer.

Setting-up of Handle Height

Set-up handle height according to your proper

body size.

Common setting-up of height corresponds to

haunch height.

 Loose screws on cover support.

 Set-up handle height according to long

holes.

 Tighten screws.

With the models with reverse gear

(MH xxxx R) the guide handle can be

swung to the left and right.

 Loosen the star knob (Fig. 14), swing the

guide handle to the side and tighten the star

knob manually.

Transport Wheel

Motor cutter can be transported to given place by

means of transport wheel.

To work with the motor-driven weeder, remove

the transport wheel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko Motorhacke AL-KO MH 5000 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info