Bedienungsanleitung Alber Esprit E34z (Seite 27 von 51) (Englisch)

785845

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

823

5. Control unit

Buttons and a joystick on the control unit enable you to activate and deactivate vari-

ous functions and settings. In this respect, the diagrams of individual display screens

shown in the following operating instructions may differ from the actual displays of your

control unit.

An audible signal will also sound with various display screens, but only if this function

has been activated (see chapter 5.3.7).

5.1 Fitting and removing the control unit for servicing

A holder [35] has been fitted to your wheelchair to secure the control unit.

•Push the guide rail [32] fitted to the underside of the control unit [20] into the slid-

ing part [33].

•Secure the control unit [20] in the sliding part [33] using the locking lever [34].

•Insert the plug [30] of the control unit into the socket [16] of the cable from the

interface and screw both parts together.

•The control unit is removed in the reverse sequence.

Before inserting the plug [30] into the socket [16], ensure that

both parts are clean and there are no metallic particles on them.

If there are any metallic particles, these must be removed with

a clean, dry cloth.

5.2 Control unit functions

5.2.1 Switching on the system

If the two Esprit wheels have been correctly attached to your wheelchair as described in

chapter 2.1, you can now switch on the system using the control unit [20]. It is imper-

ative that you do not touch the joystick [21] or any other controls of the control

unit when switching on the system. If you do, you will get an error message.

•Press the on/off button [26] briefly. The system is switched on and the Esprit start

screen is shown in the display [25] for roughly 3 seconds. The user screen illustrated in

the adjacent diagram then appears (see chapter 5.3.1 for the meaning of the symbols).

(The illustrations on the left may vary from the actual display on your control unit, as

functions may be activated or deactivated.)

•If you are not yet familiar with the Esprit and its travel characteristics you should

start by reducing the maximum speed to a minimum using the rotary switch [29] (see

chapter 5.2.6).

•Using the joystick [21] you can now set the two Esprit wheels in motion. However,

make sure you have read the safety instructions and hazard information in chapter 3.

•If the wheels do not move when switched on, the system will automatically switch

itself off after 10 minutes. For details, see also chapter 5.5.

If, after switching the system on, you see an entirely different dis-

play to the one shown here, there is an error. Chapter 6 contains a

list of these with error codes.

The language selection menu only appears the first time you switch

on the control unit (see chapter 5.4). In this menu, you can set

the language in which you wish the information in the display to

be shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber Esprit E34z Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber Esprit E34z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info