Bedienungsanleitung Alber Esprit E34z (Seite 32 von 51) (Englisch)

785845

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

5.3.2 Displays in the user screen

When the control unit is switched on, the Alber start screen (if activated) appears

first and, after about 3 seconds, this changes to the user screen illustrated in the adja-

cent diagram. The diagram shows all the symbols that can be shown on the control

unit display.

The symbols [48], [51], [52] and [54] are displayed constantly; all other symbols can be

set up individually by the user (for details, see the following chapter).

One exception is the symbol [53]. The travel modes TOUR, ECO, SPORT and SPEED are

stored here (see chapter 5.3.4 for their features). With the exception of the TOUR travel

mode, all modes are shown in the display.

The following indications mean:

[44] = The user assistant is active and assists the user during the trip. If an uphill gradi-

ent is detected by the gyro sensor in the control unit, the Esprit software automatically

decreases the system acceleration to prevent the wheelchair tipping onto the anti-tip-

pers.

[45] = The symbol is automatically displayed as soon as the spotlight (see chapter 5.2.4)

is switched on using button [15].

[46] = Displays the kilometres travelled since the start or the last RESET.

[47] = Current time (needs to be pre-set – see chapter 5.3.7).

[48] = Visual indication of the capacity of the battery pack.

[49] = Current date (needs to be pre-set – see chapter 5.3.7).

[50] = Distance that can still be travelled under ideal conditions and with the displayed

residual capacity of the battery pack.

[51] = Indication of the capacity of the battery pack in percent.

[52] = Bar display "system is ready for use".

[53] = Pre-set travel mode.

[54] = Pre-set maximum speed (displayed as a number and circular bar chart), see

chapter 5.2.6.

Most of the displays in the user screen are presented in a white colour on a black back-

ground. The displays [48], [53] and [54] appear in a green colour.

If the battery pack achieves a residual capacity of 20 percent, the displays [48], [53]

and [54] are shown in orange; from 10 percent the residual capacity is shown in red.

In both cases, the bar display [52] appears across the full width of the screen and the

range is no longer displayed in symbol [50]. These kind of symbols should remind you

to recharge the battery pack as soon as possible.

5.3.3 Calling up the menus

•To access the different menus, you need to press the menu function button [23] while

the user screen is displayed. If this occurs, the display [25] shows, in turn, the menus

travel mode, display, setting, kilometre counter, reset

•Move the joystick [21] to the left or right to access the desired menu.

•Press the menu function [23] button as soon as the menu you require is shown in the

centre of the display [25]. This takes you to the sub menu to set the various paramet-

ers (see the following chapter).

KM/H

SPORT

RANGE

DISTANCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber Esprit E34z Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber Esprit E34z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info