Bedienungsanleitung Alber Twion T24 (Seite 31 von 39) (Englisch)

785805

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

827

19. Labels and explanation of symbols

There are labels on the wheels and the battery charger which con-

tain various details on the product. In the event of a system defect,

components can be replaced by your specialist dealer as part of the

Alber exchange parts pool. Your specialist dealer will need some of

the information given on the labels.

System label on the twion wheel

Please specify the system number of the wheel when exchanging a

device as part of the Alber exchange parts pool.

The system label is on the back of the twion wheel.

“Safety inspection” label on the twion wheel

The label should remind you when your next safety inspection is

due.

It is on the back of the twion wheel.

“Technical data” label on the battery charger

The label shown in the adjacent diagram is found on the underside

of the battery charger and provides information on its technical

data.

Component label on the battery charger

Please specify the component number of the battery charger (num-

ber in the middle of the label, shown by an arrow in the adjacent

diagram) when replacing the device within the Alber exchange

parts pool.

The component label is on the underside of the battery charger.

18. Information about the charger

Guidelines and manufacturer's declaration – Electromagnetic fault tolerance

The systems discussed in this manual are intended for use in the type of electromagnetic environment specified

below. The customer or user of the device or system should insure that it is operated in such an environment.

Immunity requirements

Test level

Matched level

Electromagnetical environment -

guidelines

Discharge of static electricity (ESD)

as per IEC 61000-4-2

±8kV Aerial discharge

±4kV Discharge on

contact

±8kV Aerial discharge

±4kV Discharge on

contact

Floors should consist of wood or

concrete or be furnished with ceramic

tiles. If the floor is furnished with

synthetic material the relative humidity

must not be less than 30%.

Fast transient electrical

disturbances (Bursts) as per IEC

61000-4-4

+/- 1 kV for power cables

+/- 0,5 kV for Input- and

output wires

+/- 1 kV for power cables

+/- 0,5 kV for Input- and

output wires

The quality of the supply voltage

should be up to that of a typical

business or hospital environment.

Surges as per IEC 61000-4-5

±1 kV differential mode

±2 kV common mode

±1 kV differential mode

±2 kV common mode

The quality of the supply voltage

should be up to that of a typical

business or hospital environment.

Voltage drops, temporary

interruptions and fluctuations of the

supply voltage as per

IEC 61000-4-11

<5% UT

(>95% collapse of UT)

for ½ period

<40% UT

(>60% collapse of UT)

for 5 periods

<70% UT

(>30% collapse of UT)

for 25 periods

<5% UT

(>95% collapse of UT)

for 5 s

Passed, A

Passed, B

Passed, A

Passed, C

The quality of the supply voltage

should be up to that of a typical

business or hospital environment. If

the user of the device or system

requires continued function during

interruptions of the power supply it is

recommended to supply the device or

system from an uninterruptible power

supply or a battery.

Magnetic field at the mains

frequency (50/60 Hz)

as per IEC 61000-4-8

3A/m 3A/m Magnetic fields at the mains frequency

should conform to typical values, as

found in business and hospital

environments.

NOTE: UTis the AC supply voltage before application of the test level.

Recommended safety distances between portable and mobile

HF telecommunications devices and the non life-sustaining device or system

The systems discussed in this manual are intended for use in the type of electromagnetic environment specified

below that have controlled RF interference levels. The customer or user of the device or system can help avoiding

electromagnetic disturbances by observing the minimum distance - which depends on the power output of the

communication device, as given below - between mobile RF communication devices (senders) and the device or

system.

Rated power of

the transmitter

Safety distance, dependent on the transmission frequency [m]

150 kHz to 80 MHz

= (1

2)∗√

80 MHz to 800 MHz

= (1

2)∗√

800 MHz to 2.5 GHz

= (2

3)∗√

0.01

0.12

0.23

0.1

0.38

0,38

0,73

1,2

2,3

3,8

7,3

100

For transmitters which have a maximum rated power which is not indicated in the above table, the recommended safety distance d in metres (m) can be

determined using the equation belonging to the respective column, whereby P is the maximum rated power of the transmitter in Watts (W) according to the

transmitter manufacturer's specifications.

NOTE 1:

The higher frequency range applies at 80 MHz and 800 MHz.

NOTE 2:

These guidelines may not necessarily be applicable in all cases. The propagation of electromagnetic variables is influenced by absorption and reflection

values associated with the buildings, objects and people around.

Alber GmbH

72461 Albstadt

Made in Germany

40 °C

0 °C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber Twion T24 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber Twion T24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info