Bedienungsanleitung Alber Viamobil V25 (Seite 31 von 47) (Englisch)

785764

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

827

6.5 Error indicators

The viamobil has a variety of error indicators. They are shown as a numeric code [41]

next to a flashing warning symbol [40] on the display.

The following errors can be corrected by the person driving the viamobil:

41 40

Display indication What to do?

1Switch the viamobil off and then on again. Remove the battery, check the contacts on battery and drive unit

for dirt and refit the battery. If this does not correct the error, the device needs to be repaired.

2Switch the viamobil off and then on again. Check the plug of the control unit for foreign objects (e.g. metal

chips). If this does not correct the error, the device needs to be repaired.

3Switch the viamobil off and then on again. Check the contacts on the battery and the plug of the control

unit for foreign objects. If this does not correct the error, the device needs to be repaired.

10 A repair is necessary.

11, 12, 14, and 15 Switch the viamobil off and then on again. Check if the control unit is affected by magnetic fields and elimi-

nate any such magnetic fields. If this does not correct the error, the device needs to be repaired.

13, 20, 40, 41 Switch the viamobil off and then on again. If this does not correct the error, the device needs to be

repaired.

42 The drive unit overheated. Let it cool off so that you can resume driving.

43, 44 Switch the viamobil off and then on again. Avoid overloading the drive unit, which may be caused, for

instance, by driving up too steep an incline.

52, 53 Switch the viamobil off and then on again. Check the contacts on the battery and the drive unit. If this does

not correct the error, the device needs to be repaired.

66 The emergency release was activated. Using the device is no longer possible in this case. Deactivate the

emergency release (see chapter 3.7). If this does not correct the error, the device needs to be repaired.

67 Switch the viamobil off and then on again. If this does not correct the error, the device needs to be

repaired.

70 Check the status of the handle of the emergency release [6] (see chapter 3.7) — the grip has to be engaged.

Then turn the viamobil off and back on. If the error cannot be corrected in this way, then repairs must be

made.

71 Switch the drive off and then on again. Drive for a while along a level route or, if possible, uphill to slightly

drain the battery. If this does not correct the error, the device needs to be repaired.

72 Check the status of the handle of the emergency release [6] (see chapter 3.7) — the grip has to be engaged.

Remove the battery, check the contacts on battery and drive unit for dirt and refit the battery. Then turn the

viamobil off and back on. If the error cannot be corrected in this way, then repairs must be made.

73 A repair is necessary.

80 Switch the viamobil off and wait until the battery has cooled off. If this does not correct the error, the

device needs to be repaired.

(Continued on the next page)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alber Viamobil V25 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alber Viamobil V25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info