796988
17
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
15
  You can select from the available options via the drop-
down menu. This is set to Auto by default.
  You can select from the available options via the
drop-down menu. This is set to Auto by default.
  Different regions use different channels (Channel 1-11
in FCC (US) / IC (Canada); Channel 1-13 in ETSI (Europe); Channel 1-13 in
MKK (Japan)).
5.3.2 
Add a blacklist to deny devices with the selected MAC address from
connecting to the network.
Add a white list to allow only the devices with the selected MAC address to
access the internet if the white list is empty, users will not be able to access
the Internet.
5.3.3 
Open the  Function switch and click ; press and hold the WPS
button for 3 seconds. The Wi-Fi LED will start to flash blue. Then press the
WPS button on the device you wish to connect to within two minutes. Your
Cat4 Router will automatically assign your network settings to the device you
wish to connect to.
 Network Advanced
 
Set up the WAN connection mode and parameters here. You can set the
connection mode to PPPoE, Dynamic IP or static IP.
 PPPoE stands for Point-to-Point Protocol over Ethernet. This is a
network protocol that is mainly used for DSL services whereby individual users
connect to a modem using an Ethernet connection. Enter the username and
password provided by your network service provider and click .
 IPv6 uses two address autoconfiguration protocols, namely
Stateless Address Autoconfiguration Protocol (SLAAC) and IPv6 Dynamic
Host Configuration Protocol (DHCPv6). DHCPv6 is a network protocol used
to configure IP addresses, IP prefixes or other configurations required by IPv6
hosts working on IPv6 networks. When a host applying IPv6 receives a route
advertisement, it can create a process for it through a series of processes and
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alcatel HH42CV wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info