Bedienungsanleitung Alcatel One Touch Flash - 6042D (Seite 8 von 9) (Englisch)

626502

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Before a device model is available for sale to the public, compliance with national

regulations and standards must be shown.

Maximum SAR value for this model:

Maximum SAR value in the head: 0.284 W/Kg

Maximum SAR value in the body: 0.724 W/Kg

While there may be differences between the SAR levels of various devices and at

various positions, they all meet the government requirement for RF exposure.

For body-worn operation, the device meets FCC RF exposure guidelines provided

that it is used with a non-metallic accessory with the handset at least 10 mm

from the body. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

Additional information on SAR can be found on the Cellular Telecommunications

& Internet Association (CTIA) Web site: http:// www.phonefacts.net.

The World Health Organization (WHO) considers that present scientific

information does not indicate the need for any special precautions for use of

devices. If individuals are concerned, they might choose to limit their own or

their children’s RF exposure by limiting the length of calls, or using “hands-free”

devices to keep devices away from the head and body. (fact sheet n°193).

Additional WHO information about electromagnetic fields and public health are

available on the following website: http://www.who.int/peh-emf.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help. Changes or

modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

For the receiver devices associated with the operation of a licensed radio service

(e.g. FM broadcast), they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference.

For other devices, they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that

may cause undesired operation.

To prevent possible hearing damage, do not listen at high

volume levels for long periods.

Information about the meaning of marking CE:

That means that the product answers to

essential requirements of the European Directive

93/68/EEC applicable in the conformity

assessment procedures.

Maintenance

Use a dry soft cloth to wipe general dirt.

Do not use a hard cloth, benzene or thinner to wipe the phone, otherwise, the

surface of the phone will be scratched or could even result in the fading of color.

Take Care of your Device

Your device is a product of superior design and craftsmanship and should be

handled with care: The following suggestions will help you protect your phone:

 Always keep the small parts of the phone away from children.

 Keep the device dry, Precipitation, humidity, and all types of liquids or

moisture can contain minerals that will rust electronic circuits. If your device

does get wet, remove the battery, and allow the device to dry completely

Before replacing it

 Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

 Do not store the device in high or cold temperature. High temperatures can

shorten the life of electronic devices and damage batteries.

 Do not attempt to open the device other than as instructed in this guide.

 Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device. Only use a soft, clean, dry cloth to clean the surface of the device.

 Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

 Use indoor chargers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel One Touch Flash - 6042D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info