Bedienungsanleitung Alcatel One Touch Pixi 3 4.0 - 4013X (Seite 20 von 22) (Englisch)

601703

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

39 40

4) Modification, adjustment or alteration of software or hardware

performed by individuals not authorized by TCL Communication Ltd,

5) Inclement weather, lightning, fire, humidity, infiltration of liquids or

foods, chemical products, download of files, crash, high voltage,

corrosion, oxidation…

Your phone will not be repaired in case labels or serial numbers (IMEI)

have been removed or altered.

There are no express warranties, whether written, oral or implied, other

than this printed limited warranty or the mandatory warranty provided

by your country or jurisdiction.

In no event shall TCL Communication Ltd or any of its affiliates be

liable for indirect, incidental or consequential damages of any nature

whatsoever, including but not limited commercial or financial loss or

damage, loss of data or loss of image to the full extent those damages

can be disclaimed by law.

Some countries/states do not allow the exclusion or limitation of

indirect, incidental or consequential damages, or limitation of the

duration of implied warranties, so the preceding limitations or exclusions

may not apply to you.

Troubleshooting��

Before contacting the service centre, you are advised to follow the

instructions below:

• You are advised to fully charge (

) the battery for optimal

operation.

• Avoid storing large amounts of data in your phone as this may

affect its performance.

• Use Factory data reset and Mobile Upgrade tool to perform

phone formatting or software upgrading (to reset factory data,

hold down the Power key and the Volume up key at the same

time under power off mode). ALL User phone data: contacts,

photos, messages and files, downloaded applications will be lost

permanently. It is strongly advised to fully backup the phone data

and profile via Smart Suite before doing formatting and upgrading.

and carry out the following checks:

My phone cannot be switched on or is frozen

• When the phone cannot be switched on, charge for at least 20

minutes to ensure the minimum battery power needed, then try

to switch on again.

• When the phone falls into a loop during power on-off animation

and the user interface cannot be accessed, press and hold the

Volume down key to enter Safe Mode. This eliminates any

abnormal OS booting issues caused by 3rd party APKs.

• If neither method is effective, please reset the phone using the

Power key and the Volume up key (holding both together) or

upgrade software via FOTA/Mobile Upgrade tool.

My phone has not responded for several minutes

• Restart your phone by pressing and holding the Power key.

• Remove the battery and re-insert it, then restart the phone

• If it still does not work, please use Factory data reset to reset the

phone or FOTA/Mobile Upgrade to upgrade software.

My phone turns off by itself

• Check that your screen is locked when you are not using your

phone, and make sure the Power key is not accidentally contacted

while the screen is unlocked.

• Check the battery charge level.

• If it still does not work, please use Factory data reset to reset the

phone or FOTA/Mobile Upgrade to upgrade software.

Pixi3-4_4013X_4013D GB QG_Eng_EN_07_150113.indd 39-40 2015/1/13 13:56:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alcatel One Touch Pixi 3 4.0 - 4013X Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alcatel One Touch Pixi 3 4.0 - 4013X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info